Drill Bits

The DEWALT Extreme Masonry Drill Bits offer excellent quality for all types of masonry work. They last up to 2 times longer and deliver up to 50% more holes per charge on a cordless drill than a standard masonry bit. Optimum carbide grade maximises durability.

A unique tip design provides an efficient drilling action and reduced walking for greater accuracy. Optimised milled flute offers fast drilling and the special copper brazing withstands high temperatures.

Applications: Typically used for drilling anchors, plastic plugs, fixings or pipework clearance holes.

Suitable for masonry, brick, stone, tiles and light concrete.

This DEWALT Extreme Masonry Drill Bit has the following specification:
Diameter: 14mm
Overall Length: 150mm
Working Length: 100mm

The DEWALT Extreme Flatwood Drill Bits have an extra thick robust steel shank for outstanding durability and chamfered outer cutting spurs for clean, very fast drilling and extended drilling life. The precision ground central point has an optimised design for faster material penetration and increased drilling speed.

Ideal for the rapid drilling of holes in wood, for door locks, mortising, electrical and plumbing work. Suitable for natural hard and soft wood, chipboard and other man made materials.

A high quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system. Fully heat treated to eliminate bending and in a shot blast finish for rust protection.

A premium quality masonry heat treated bit for use in cordless and corded drill drivers in both rotary and hammer action. 130° high grade industrial carbide tip in a silver and black finish.

An economic High Speed Steel drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

A high quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system. Fully heat treated to eliminate bending and in a shot blast finish for rust protection.

The BlueSpot 11 Piece 19mm - 64mm Hole Saw Set is ideal for non-ferrous metals, plasterboard, plastic and wood. Manufactured from heat-treated carbon steel for increased durability and cutting power and includes a handy carrying case for quick and convenient storage. Includes hex key and arbors.

Trend Snappy Snap/CS/10 Countersink 3.25mm. 9.5mm diameter countersink - with adjustable 3.25mm pilot drill. 9.5mm diameter countersink with pilot drill designed for Imperial screws up to 8 gauge. The perfect, fast swap accessory for clean, consistent finishes. Made from hardened tool steel for assured performance. Ideally suited to hard and softwoods alike. Fitted with high quality 3.25mm diameter replaceable HSS (High Speed Steel) drill designed for piloting work with Imperial screws up to 8 gauge in softwood and 6 gauge in hardwood. Easily adjustable drill length for different timber thicknesses and fast alignment. Can be used to make countersinks and can also be used for counterbores; ideal for use with Trend Snappy SNAP/PC/95T or SNAP/PC/38 Plug Cutters for applications where the fixings need to be hidden.

Trend Snappy Snap/CS/12 Countersink 3.5mm. 12.7m diameter countersink - with adjustable 3.5mm pilot drill. 12.7mm diameter countersink with pilot drill designed for Imperial screws up to 8 gauge. The perfect, fast swap accessory for clean, consistent finishes. Made from hardened tool steel for assured performance. Ideally suited to hard and softwoods alike. Fitted with high quality 3.25mm diameter replaceable HSS (High Speed Steel) drill designed for piloting work with Imperial screws up to 8 gauge in softwood and 6 gauge in hardwood. Easily adjustable drill length for different timber thicknesses and fast alignment. Can be used to make countersinks and can also be used for counterbores; ideal for use with Trend Snappy SNAP/PC/95T or SNAP/PC/38 Plug Cutters for applications where the fixings need to be hidden.

The DEWALT Extreme Flatwood Drill Bits have an extra thick robust steel shank for outstanding durability and chamfered outer cutting spurs for clean, very fast drilling and extended drilling life. The precision ground central point has an optimised design for faster material penetration and increased drilling speed.

Ideal for the rapid drilling of holes in wood, for door locks, mortising, electrical and plumbing work. Suitable for natural hard and soft wood, chipboard and other man made materials.

The BlueSpot 75mm x 165mm Flat SDS Plus Chisel is manufactured from carbon steel for high durability on demanding building sites and DIY applications. The product is ideal for the removal of wall and floor tiles, breaking up masonry and mortar as well as roughcasting, dirt and plaster from walls. The strengthened shaft and sharpened tip increase accuracy and longevity of the tool. The chisel is for use with an SDS drill.

The Vitrex Tile and Glass Drill Bits have a tungsten carbide tip, which gives them excellent strength and durability. The precision 'spearhead' design prevents chipping or breaking. They are ideal for drilling tiles and glass.

Trend Snappy Snap/CS/6 Drill Countersink 2.5mm. 9.5mm diameter countersink - with adjustable 2.5mm pilot drill. 9.5mm diameter countersink with pilot drill designed for Imperial No6 gauge screws in softwood. The perfect, fast swap accessory for clean, consistent finishes.
Made from hardened tool steel for assured performance. Ideally suited to hard and softwoods alike. Fitted with high quality 2.5mm diameter replaceable HSS (High Speed Steel) drill Ideal for metric screws up to 5mm gauge. Easily adjustable drill length for different timber thicknesses and fast alignment. Can be used to make countersinks and can also be used for counterbores; ideal for use with Trend Snappy SNAP/PC/95T or SNAP/PC/38 Plug Cutters for applications where the fixings need to be hidden.

Trend Snappy Snap/CS/4 Drill Countersink 2mm. Trend Snappy 9.5mm diameter countersink with adjustable 2mm drill. 9.5mm diameter countersink with pilot drill designed for Imperial gauge screws. The perfect, fast swap accessory for clean, consistent finishes. Made from hardened tool steel for assured performance. Fitted with high quality 2mm diameter replaceable HSS (High Speed Steel) designed for piloting in hardwoods using No4 Imperial gauge screws. Easily adjustable drill length for different timber thicknesses and fast alignment. Can be used to make countersinks and also counterbores when used with Trend Snappy SNAP/PC/95T or SNAP/PC/38 Plug Cutters for applications where the fixings need to be hidden.

Trend Snappy Snap/CS/8 Countersink 2.75mm. 9.5mm diameter countersink - with adjustable 2.75mm pilot drill. 9.5mm diameter countersink with pilot drill designed for Imperial screws up to 8 gauge. The perfect, fast swap accessory for clean, consistent finishes. Made from hardened tool steel for assured performance. Ideally suited to hard and softwoods alike. Fitted with high quality 2.75mm diameter replaceable HSS (High Speed Steel) drill designed for piloting work with Imperial screws up to 8 gauge in softwood and 6 gauge in hardwood. Easily adjustable drill length for different timber thicknesses and fast alignment. Can be used to make countersinks and can also be used for counterbores; ideal for use with Trend Snappy SNAP/PC/95T or SNAP/PC/38 Plug Cutters for applications where the fixings need to be hidden.

Manufactured from a high grade M2 tool Steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Fully ground from solid material and dimensionally precise. Manufactured to DIN 338.

A premium quality masonry heat treated bit for use in cordless and corded drill drivers in both rotary and hammer action. 130° high grade industrial carbide tip in a silver and black finish.

The DEWALT SDS Plus EXTREME 2®Drill Bit is made from superior carbide grade for long life and greater durability. The hardened body adds further strength and helps to reduce breakage. Its optimised flute design provides efficient debris removal whilst the tip design ensures better bit penetration.

This DEWALT SDS Plus EXTREME 2® Drill Bit has the following dimensions:

Diameter: 16mm
Working Length: 100mm
Overall Length: 160mm
Pack Quantity: 1

A high performance drill bit with a superior European carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank and a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.

The DEWALT SDS Plus EXTREME 2®Drill Bit is made from superior carbide grade for long life and greater durability. The hardened body adds further strength and helps to reduce breakage. Its optimised flute design provides efficient debris removal whilst the tip design ensures better bit penetration.

This DEWALT SDS Plus EXTREME 2® Drill Bit has the following dimensions:

Diameter: 14mm
Working Length: 150mm
Overall Length: 200mm
Pack Quantity: 1

The nylon brush is less aggressive and ideal for light de-burring, polishing and finishing.

The BlueSpot 3 Piece SDS plus Chisel Set is specially designed for chipping and chiselling of glazing compounds, mortar, tile and other masonry products. Perfect for all chasing and demolition work in mortar, brick and concrete. Heat-treated for increased durability and suitable for use with SDS plus power drills with a roto-stop function. Includes 3 SDS plus chisels.

A premium quality masonry heat treated bit for use in cordless and corded drill drivers in both rotary and hammer action. 130° high grade industrial carbide tip in a silver and black finish.

A high quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system. Fully heat treated to eliminate bending and in a shot blast finish for rust protection.

A high performance drill bit with a superior European carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank and a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.

The DEWALT Extreme Flatwood Drill Bits have an extra thick robust steel shank for outstanding durability and chamfered outer cutting spurs for clean, very fast drilling and extended drilling life. The precision ground central point has an optimised design for faster material penetration and increased drilling speed.

Ideal for the rapid drilling of holes in wood, for door locks, mortising, electrical and plumbing work. Suitable for natural hard and soft wood, chipboard and other man made materials.

The Faithfull Metric HSS Drill Bit Sets are designed for cutting metal, however they are also suitable for drilling holes in timber, chipboard and plywood. The sets have an easy flip open action case with transparent front for easy checking of contents.

The Faithfull Carbon Steel Rosehead 60° included angle countersink. For countersinking screw holes in wood for the flush fitting of screw heads.

An economic High Speed Steel drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

Suitable for the wet drilling of porcelain, marble, granite and travertine tiles with a nickel plated body and an electro plated diamond cutting rim with a straight shank that fits all drill chucks. For best results use with Tile Rite universal guide and cooling system. Hole size suitable for red wall plug.

A high quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system. Fully heat treated to eliminate bending and in a shot blast finish for rust protection.

A high performance wood drill for drilling a deep hole into various types of timber in a bright and black finish. Made from high grade carbon Steel with a screw point.

A high performance drill bit with a superior European carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. Rebar drilling will result in Reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank and a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.

Manufactured from a high grade M2 tool Steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Fully ground from solid material and dimensionally precise. Manufactured to DIN 338.

A high performance drill bit with a superior European carbide tip to give extended durability. Rebar drilling will result in Reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank, a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.

A premium quality masonry heat treated bit for use in cordless and corded drill drivers in both rotary and hammer action. 130° high grade industrial carbide tip in a silver and black finish.

The Faithfull Carbon Steel Rosehead 60° included angle countersink. For countersinking screw holes in wood for the flush fitting of screw heads.

These Faithfull SDS Plus Chisel Bits are made from drop-forged chrome molybdenum with a heat-treated tempered edge. Molybdenum is ideally suited for chisels because of its known reputation for hardness, toughness and wear resistance. Used mainly for light demolition, chiselling, stripping plaster, mortar chasing, channelling and breaking through brickwork.

The DEWALT Extreme Flatwood Drill Bits have an extra thick robust steel shank for outstanding durability and chamfered outer cutting spurs for clean, very fast drilling and extended drilling life. The precision ground central point has an optimised design for faster material penetration and increased drilling speed.

Ideal for the rapid drilling of holes in wood, for door locks, mortising, electrical and plumbing work. Suitable for natural hard and soft wood, chipboard and other man made materials.

A high performance drill bit with a superior European carbide tip to give extended durability. Rebar drilling will result in Reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank, a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.

The nylon brush is less aggressive and ideal for light de-burring, polishing and finishing.

The twin cutting edge and integral centre point enhances speed and provides rapid chip removal when drilling various types of timber and man-made boards. Three point design for faster, cleaner holes in a bright finish. Compound angle, ground recessed cutting edge for superior cutting and 1/4” Quick release hexagonal shank for use in both 3 jaw chucks and 1/4” quick release adaptors.

The twin cutting edge and integral centre point enhances speed and provides rapid chip removal when drilling various types of timber and man-made boards. Three point design for faster, cleaner holes in a bright finish. Compound angle, ground recessed cutting edge for superior cutting and 1/4” Quick release hexagonal shank for use in both 3 jaw chucks and 1/4” quick release adaptors.

These DEWALT multi-material drill bits can be used in wood, masonry and metal and are ideal when drilling near to corners and edges.

The drill bits have a fully supported carbide head which gives faster drilling and a non slip shank which ensures maximum retention in chuck. They can be used in rotary or percussion drilling modes.

The DEWALT DEWDT6525QZ multi material drill bit has the following dimensions:
Size: 12mm x 153mm.

The DEWALT SDS Plus EXTREME 2®Drill Bit is made from superior carbide grade for long life and greater durability. The hardened body adds further strength and helps to reduce breakage. Its optimised flute design provides efficient debris removal whilst the tip design ensures better bit penetration.

This DEWALT SDS Plus EXTREME 2® Drill Bit has the following dimensions:

Diameter: 12mm
Working Length: 150mm
Overall Length: 200mm
Pack Quantity: 1

A high performance wood drill for drilling a deep hole into various types of timber in a bright and black finish. Made from high grade carbon Steel with a screw point.

A high quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system. Fully heat treated to eliminate bending and in a shot blast finish for rust protection.

The DEWALT SDS Plus EXTREME 2®Drill Bit is made from superior carbide grade for long life and greater durability. The hardened body adds further strength and helps to reduce breakage. Its optimised flute design provides efficient debris removal whilst the tip design ensures better bit penetration.

This DEWALT SDS Plus EXTREME 2® Drill Bit has the following dimensions:

Diameter: 7mm
Working Length: 150mm
Overall Length: 210mm
Pack Quantity: 1

A high performance drill bit with a superior European carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank and a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.

Suitable for the wet drilling of porcelain, marble, granite and travertine tiles with a nickel plated body and an electro plated diamond cutting rim with a straight shank that fits all drill chucks. For best results use with Tile Rite universal guide and cooling system. Hole size suitable for brown solid wall plug.

A high quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system. Fully heat treated to eliminate bending and in a shot blast finish for rust protection.

The DEWALT Extreme Masonry Drill Bits offer excellent quality for all types of masonry work. They last up to 2 times longer and deliver up to 50% more holes per charge on a cordless drill than a standard masonry bit. Optimum carbide grade maximises durability.

A unique tip design provides an efficient drilling action and reduced walking for greater accuracy. Optimised milled flute offers fast drilling and the special copper brazing withstands high temperatures.

Applications: Typically used for drilling anchors, plastic plugs, fixings or pipework clearance holes.

Suitable for masonry, brick, stone, tiles and light concrete.

This DEWALT Extreme Masonry Drill Bit has the following specification:

Diameter: 12mm
Overall Length: 150mm
Working Length: 100mm

A high performance wood drill for drilling a deep hole into various types of timber in a bright and black finish. Made from high grade carbon Steel with a screw point.

The twin cutting edge and integral centre point enhances speed and provides rapid chip removal when drilling various types of timber and man-made boards. Three point design for faster, cleaner holes in a bright finish. Compound angle, ground recessed cutting edge for superior cutting and 1/4” Quick release hexagonal shank for use in both 3 jaw chucks and 1/4” quick release adaptors.

The DEWALT SDS Plus EXTREME 2®Drill Bit is made from superior carbide grade for long life and greater durability. The hardened body adds further strength and helps to reduce breakage. Its optimised flute design provides efficient debris removal whilst the tip design ensures better bit penetration.

This DEWALT SDS Plus EXTREME 2® Drill Bit has the following dimensions:

Diameter: 10mm
Working Length: 150mm
Overall Length: 210mm
Pack Quantity: 1

A high performance drill bit with a superior European carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank and a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.

These Faithfull SDS Plus Chisel Bits are made from drop-forged chrome molybdenum with a heat-treated tempered edge. Molybdenum is ideally suited for chisels because of its known reputation for hardness, toughness and wear resistance. Used mainly for light demolition, chiselling, stripping plaster, mortar chasing, channelling and breaking through brickwork.

These Faithfull SDS Plus Chisel Bits are made from drop-forged chrome molybdenum with a heat-treated tempered edge. Molybdenum is ideally suited for chisels because of its known reputation for hardness, toughness and wear resistance. Used mainly for light demolition, chiselling, stripping plaster, mortar chasing, channelling and breaking through brickwork.

7mm x 160mm Irwin Cordless Multi-Purpose Drill Bit designed for cordless, low speed multi-purpose drilling. This drill bit offers around 10% extra battery life per charge. It has a four-facet ground carbide tip for lower drilling pressure and better centring and allow for combined drilling into wood and brickwork. Only one drill bit is needed to do the job and will drill a wide selection of different materials like brickwork, ceramic tiles, breeze blocks, wood, dry wall, gypsum board, limestone, slate, marble, eternite and plastics. Length: 160mm. Diameter: 7mm. Flute Length: 109mm.

The DEWALT Extreme Flatwood Drill Bits have an extra thick robust steel shank for outstanding durability and chamfered outer cutting spurs for clean, very fast drilling and extended drilling life. The precision ground central point has an optimised design for faster material penetration and increased drilling speed.

Ideal for the rapid drilling of holes in wood, for door locks, mortising, electrical and plumbing work. Suitable for natural hard and soft wood, chipboard and other man made materials.

The DEWALT SDS Plus EXTREME 2®Drill Bit is made from superior carbide grade for long life and greater durability. The hardened body adds further strength and helps to reduce breakage. Its optimised flute design provides efficient debris removal whilst the tip design ensures better bit penetration.

This DEWALT SDS Plus EXTREME 2® Drill Bit has the following dimensions:

Diameter: 6mm
Working Length: 150mm
Overall Length: 210mm
Pack Quantity: 1

A premium quality masonry heat treated bit for use in cordless and corded drill drivers in both rotary and hammer action. 130° high grade industrial carbide tip in a silver and black finish.

The twin cutting edge and integral centre point enhances speed and provides rapid chip removal when drilling various types of timber and man-made boards. Three point design for faster, cleaner holes in a bright finish. Compound angle, ground recessed cutting edge for superior cutting and 1/4” Quick release hexagonal shank for use in both 3 jaw chucks and 1/4” quick release adaptors.

An economic High Speed Steel drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

Manufactured from a high grade M2 tool Steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Fully ground from solid material and dimensionally precise. Manufactured to DIN 338.

The DEWALT Extreme Flatwood Drill Bits have an extra thick robust steel shank for outstanding durability and chamfered outer cutting spurs for clean, very fast drilling and extended drilling life. The precision ground central point has an optimised design for faster material penetration and increased drilling speed.

Ideal for the rapid drilling of holes in wood, for door locks, mortising, electrical and plumbing work. Suitable for natural hard and soft wood, chipboard and other man made materials.

The DEWALT Extreme Flatwood Drill Bits have an extra thick robust steel shank for outstanding durability and chamfered outer cutting spurs for clean, very fast drilling and extended drilling life. The precision ground central point has an optimised design for faster material penetration and increased drilling speed.

Ideal for the rapid drilling of holes in wood, for door locks, mortising, electrical and plumbing work. Suitable for natural hard and soft wood, chipboard and other man made materials.

The DEWALT Extreme Flatwood Drill Bits have an extra thick robust steel shank for outstanding durability and chamfered outer cutting spurs for clean, very fast drilling and extended drilling life. The precision ground central point has an optimised design for faster material penetration and increased drilling speed.

Ideal for the rapid drilling of holes in wood, for door locks, mortising, electrical and plumbing work. Suitable for natural hard and soft wood, chipboard and other man made materials.

The twin cutting edge and integral centre point enhances speed and provides rapid chip removal when drilling various types of timber and man-made boards. Three point design for faster, cleaner holes in a bright finish. Compound angle, ground recessed cutting edge for superior cutting and 1/4” Quick release hexagonal shank for use in both 3 jaw chucks and 1/4” quick release adaptors.

A high performance drill bit with a superior European carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. Rebar drilling will result in reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank and a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.

The DEWALT SDS Plus EXTREME 2®Drill Bit is made from superior carbide grade for long life and greater durability. The hardened body adds further strength and helps to reduce breakage. Its optimised flute design provides efficient debris removal whilst the tip design ensures better bit penetration.

This DEWALT SDS Plus EXTREME 2® Drill Bit has the following dimensions:

Diameter: 6.5mm
Working Length: 150mm
Overall Length: 210mm
Pack Quantity: 1

The DEWALT Extreme Flatwood Drill Bits have an extra thick robust steel shank for outstanding durability and chamfered outer cutting spurs for clean, very fast drilling and extended drilling life. The precision ground central point has an optimised design for faster material penetration and increased drilling speed.

Ideal for the rapid drilling of holes in wood, for door locks, mortising, electrical and plumbing work. Suitable for natural hard and soft wood, chipboard and other man made materials.

A high quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system. Fully heat treated to eliminate bending and in a shot blast finish for rust protection.

A high performance wood drill for drilling a deep hole into various types of timber in a bright and black finish. Made from high grade carbon Steel with a screw point.

The twin cutting edge and integral centre point enhances speed and provides rapid chip removal when drilling various types of timber and man-made boards. Three point design for faster, cleaner holes in a bright finish. Compound angle, ground recessed cutting edge for superior cutting and 1/4” Quick release hexagonal shank for use in both 3 jaw chucks and 1/4” quick release adaptors.

The twin cutting edge and integral centre point enhances speed and provides rapid chip removal when drilling various types of timber and man-made boards. Three point design for faster, cleaner holes in a bright finish. Compound angle, ground recessed cutting edge for superior cutting and 1/4” Quick release hexagonal shank for use in both 3 jaw chucks and 1/4” quick release adaptors.

The twin cutting edge and integral centre point enhances speed and provides rapid chip removal when drilling various types of timber and man-made boards. Three point design for faster, cleaner holes in a bright finish. Compound angle, ground recessed cutting edge for superior cutting and 1/4” Quick release hexagonal shank for use in both 3 jaw chucks and 1/4” quick release adaptors.

5.5mm x 160mm Irwin Cordless Multi-Purpose Drill Bit designed for cordless, low speed multi-purpose drilling. This drill bit offers around 10% extra battery life per charge. It has a four-facet ground carbide tip for lower drilling pressure and better centring and allow for combined drilling into wood and brickwork. Only one drill bit is needed to do the job and will drill a wide selection of different materials like brickwork, ceramic tiles, breeze blocks, wood, dry wall, gypsum board, limestone, slate, marble, eternite and plastics. Length: 160mm. Diameter: 5.5mm. Flute Length: 109mm.

For drilling small diameter holes into various types of timber and man-made boards. Made from high grade High Speed Steel for longer life, fully grounded and has up to 3x the heat resistance of standard carbon Steel bits.

A high performance wood drill for drilling a deep hole into various types of timber in a bright and black finish. Made from high grade carbon Steel with a screw point.

These DEWALT multi-material drill bits can be used in wood, masonry and metal and are ideal when drilling near to corners and edges.

The drill bits have a fully supported carbide head which gives faster drilling and a non slip shank which ensures maximum retention in chuck. They can be used in rotary or percussion drilling modes.

The DEWALT DEWDT6524QZ multi material drill bit has the following dimensions:
Size: 10mm x 134mm.

Manufactured from a high grade M2 tool Steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Fully ground from solid material and dimensionally precise. Manufactured to DIN 338.

A high performance wood drill for drilling a deep hole into various types of timber in a bright and black finish. Made from high grade carbon Steel with a screw point.

An economic High Speed Steel drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

An economic High Speed Steel drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

The DEWALT SDS Plus EXTREME 2®Drill Bit is made from superior carbide grade for long life and greater durability. The hardened body adds further strength and helps to reduce breakage. Its optimised flute design provides efficient debris removal whilst the tip design ensures better bit penetration.

This DEWALT SDS Plus EXTREME 2® Drill Bit has the following dimensions:

Diameter: 6.5mm
Working Length: 150mm
Overall Length: 210mm
Pack Quantity: 1

The DEWALT SDS Plus EXTREME 2®Drill Bit is made from superior carbide grade for long life and greater durability. The hardened body adds further strength and helps to reduce breakage. Its optimised flute design provides efficient debris removal whilst the tip design ensures better bit penetration.

This DEWALT SDS Plus EXTREME 2® Drill Bit has the following dimensions:

Diameter: 7mm
Working Length: 100mm
Overall Length: 160mm
Pack Quantity: 1

The DEWALT Extreme Flatwood Drill Bits have an extra thick robust steel shank for outstanding durability and chamfered outer cutting spurs for clean, very fast drilling and extended drilling life. The precision ground central point has an optimised design for faster material penetration and increased drilling speed.

Ideal for the rapid drilling of holes in wood, for door locks, mortising, electrical and plumbing work. Suitable for natural hard and soft wood, chipboard and other man made materials.

The DEWALT Extreme Flatwood Drill Bits have an extra thick robust steel shank for outstanding durability and chamfered outer cutting spurs for clean, very fast drilling and extended drilling life. The precision ground central point has an optimised design for faster material penetration and increased drilling speed.

Ideal for the rapid drilling of holes in wood, for door locks, mortising, electrical and plumbing work. Suitable for natural hard and soft wood, chipboard and other man made materials.

The DEWALT Extreme Flatwood Drill Bits have an extra thick robust steel shank for outstanding durability and chamfered outer cutting spurs for clean, very fast drilling and extended drilling life. The precision ground central point has an optimised design for faster material penetration and increased drilling speed.

Ideal for the rapid drilling of holes in wood, for door locks, mortising, electrical and plumbing work. Suitable for natural hard and soft wood, chipboard and other man made materials.

Manufactured from a high grade M2 tool Steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Fully ground from solid material and dimensionally precise. Manufactured to DIN 338.

These DEWALT multi-material drill bits can be used in wood, masonry and metal and are ideal when drilling near to corners and edges.

The drill bits have a fully supported carbide head which gives faster drilling and a non slip shank which ensures maximum retention in chuck. They can be used in rotary or percussion drilling modes.

The DEWALT DEWDT6522QZ multi material drill bit has the following dimensions:
Size: 8mm x 134mm.

The DEWALT Extreme Masonry Drill Bits offer excellent quality for all types of masonry work. They last up to 2 times longer and deliver up to 50% more holes per charge on a cordless drill than a standard masonry bit. Optimum carbide grade maximises durability.

A unique tip design provides an efficient drilling action and reduced walking for greater accuracy. Optimised milled flute offers fast drilling and the special copper brazing withstands high temperatures.

Applications: Typically used for drilling anchors, plastic plugs, fixings or pipework clearance holes.

Suitable for masonry, brick, stone, tiles and light concrete.

This DEWALT Extreme Masonry Drill Bit has the following specification:
Diameter: 10mm
Overall Length: 120mm
Working Length: 80mm

7mm x 110mm Irwin Cordless Multi-Purpose Drill Bit designed for cordless, low speed multi-purpose drilling. This drill bit offers around 10% extra battery life per charge. It has a four-facet ground carbide tip for lower drilling pressure and better centring and allow for combined drilling into wood and brickwork. Only one drill bit is needed to do the job and will drill a wide selection of different materials like brickwork, ceramic tiles, breeze blocks, wood, dry wall, gypsum board, limestone, slate, marble, eternite and plastics. Length: 110mm. Diameter: 7mm. Flute Length: 59mm.

The twin cutting edge and integral centre point enhances speed and provides rapid chip removal when drilling various types of timber and man-made boards. Three point design for faster, cleaner holes in a bright finish. Compound angle, ground recessed cutting edge for superior cutting and 1/4” Quick release hexagonal shank for use in both 3 jaw chucks and 1/4” quick release adaptors.

The DEWALT SDS Plus EXTREME 2®Drill Bit is made from superior carbide grade for long life and greater durability. The hardened body adds further strength and helps to reduce breakage. Its optimised flute design provides efficient debris removal whilst the tip design ensures better bit penetration.

This DEWALT SDS Plus EXTREME 2® Drill Bit has the following dimensions:

Diameter: 8mm
Working Length: 100mm
Overall Length: 160mm
Pack Quantity: 1

An economic High Speed Steel drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

Bright finish flat wood bit with a twin cutting edge and integral centre point that enhances speed and provides rapid chip removal when drilling various types of timber and man-made boards. Compound angle, ground recessed cutting edge for superior cutting. 1/4” Quick release hexagonal shank for use in both 3 jaw chucks and 1/4” quick release adaptors.

The twin cutting edge and integral centre point enhances speed and provides rapid chip removal when drilling various types of timber and man-made boards. Three point design for faster, cleaner holes in a bright finish. Compound angle, ground recessed cutting edge for superior cutting and 1/4” Quick release hexagonal shank for use in both 3 jaw chucks and 1/4” quick release adaptors.

These DEWALT multi-material drill bits can be used in wood, masonry and metal and are ideal when drilling near to corners and edges.

The drill bits have a fully supported carbide head which gives faster drilling and a non slip shank which ensures maximum retention in chuck. They can be used in rotary or percussion drilling modes.

The DEWALT DEWDT6521QZ multi material drill bit has the following dimensions:
Size: 7mm x 123mm.