Drill Bits

A high quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system. Fully heat treated to eliminate bending and in a shot blast finish for rust protection.

A high quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system. Fully heat treated to eliminate bending and in a shot blast finish for rust protection.

A premium quality masonry heat treated bit for use in cordless and corded drill drivers in both rotary and hammer action. 130° high grade industrial carbide tip in a silver and black finish.

The DEWALT Extreme Masonry Drill Bits offer excellent quality for all types of masonry work. They last up to 2 times longer and deliver up to 50% more holes per charge on a cordless drill than a standard masonry bit. Optimum carbide grade maximises durability.

A unique tip design provides an efficient drilling action and reduced walking for greater accuracy. Optimised milled flute offers fast drilling and the special copper brazing withstands high temperatures.

Applications: Typically used for drilling anchors, plastic plugs, fixings or pipework clearance holes.

Suitable for masonry, brick, stone, tiles and light concrete.

This DEWALT Extreme Masonry Drill Bit has the following specification:

Diameter: 7mm
Overall Length: 150mm
Working Length: 100mm

The DEWALT SDS Plus EXTREME 2®Drill Bit is made from superior carbide grade for long life and greater durability. The hardened body adds further strength and helps to reduce breakage. Its optimised flute design provides efficient debris removal whilst the tip design ensures better bit penetration.

This DEWALT SDS Plus EXTREME 2® Drill Bit has the following dimensions:

Diameter: 6.5mm
Working Length: 100mm
Overall Length: 160mm
Pack Quantity: 1

The DEWALT SDS Plus EXTREME 2®Drill Bit is made from superior carbide grade for long life and greater durability. The hardened body adds further strength and helps to reduce breakage. Its optimised flute design provides efficient debris removal whilst the tip design ensures better bit penetration.

This DEWALT SDS Plus EXTREME 2® Drill Bit has the following dimensions:

Diameter: 6mm
Working Length: 100mm
Overall Length: 160mm
Pack Quantity: 1

The DEWALT SDS Plus EXTREME 2®Drill Bit is made from superior carbide grade for long life and greater durability. The hardened body adds further strength and helps to reduce breakage. Its optimised flute design provides efficient debris removal whilst the tip design ensures better bit penetration.

This DEWALT SDS Plus EXTREME 2® Drill Bit has the following dimensions:
Diameter: 5mm
Working Length: 100mm
Overall Length: 160mm
Pack Quantity: 1

The DEWALT Extreme Masonry Drill Bits offer excellent quality for all types of masonry work. They last up to 2 times longer and deliver up to 50% more holes per charge on a cordless drill than a standard masonry bit. Optimum carbide grade maximises durability.

A unique tip design provides an efficient drilling action and reduced walking for greater accuracy. Optimised milled flute offers fast drilling and the special copper brazing withstands high temperatures.

Applications: Typically used for drilling anchors, plastic plugs, fixings or pipework clearance holes.

Suitable for masonry, brick, stone, tiles and light concrete.

This DEWALT Extreme Masonry Drill Bit has the following specification:
Diameter: 8mm
Overall Length: 120mm
Working Length: 80mm

For drilling small diameter holes into various types of timber and man-made boards. Made from high grade High Speed Steel for longer life, fully grounded and has up to 3x the heat resistance of standard carbon Steel bits.

The DEWALT SDS Plus EXTREME 2®Drill Bit is made from superior carbide grade for long life and greater durability. The hardened body adds further strength and helps to reduce breakage. Its optimised flute design provides efficient debris removal whilst the tip design ensures better bit penetration.

This DEWALT SDS Plus EXTREME 2® Drill Bit has the following dimensions:

Diameter: 5.5mm
Working Length: 100mm
Overall Length: 160mm
Pack Quantity: 1

The BlueSpot 50mm x 250mm Flat SDS Chisel is manufactured from carbon steel for high durability on demanding building sites and DIY applications. The Flat Chisel is ideal for the removal of wall and floor tiles and breaking up stone and concrete. The strengthened shaft and sharpened tip increase accuracy and longevity of the tool. The chisel is for use with an SDS drill.

An economic High Speed Steel drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

A high performance drill bit with a superior European carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. Rebar drilling will result in Reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank and a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.

A premium quality masonry heat treated bit for use in cordless and corded drill drivers in both rotary and hammer action. 130° high grade industrial carbide tip in a silver and black finish.

A high quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system. Fully heat treated to eliminate bending and in a shot blast finish for rust protection.

5.5mm x 95mm Irwin Cordless Multi-Purpose Drill Bit designed for cordless, low speed multi-purpose drilling. This drill bit offers around 10% extra battery life per charge. It has a four-facet ground carbide tip for lower drilling pressure and better centring and allow for combined drilling into wood and brickwork. Only one drill bit is needed to do the job and will drill a wide selection of different materials like brickwork, ceramic tiles, breeze blocks, wood, dry wall, gypsum board, limestone, slate, marble, eternite and plastics. Length: 95mm. Diameter: 5.5mm. Flute Length: 49mm.

Manufactured from a high grade M2 tool Steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Fully ground from solid material and dimensionally precise. Manufactured to DIN 338.

These DEWALT multi-material drill bits can be used in wood, masonry and metal and are ideal when drilling near to corners and edges.

The drill bits have a fully supported carbide head which gives faster drilling and a non slip shank which ensures maximum retention in chuck. They can be used in rotary or percussion drilling modes.

The DEWALT DEWDT6520QZ multi material drill bit has the following dimensions:
Size: 6.5mm x 123mm.

A high performance drill bit with a superior European carbide tip to give extended durability. German tested and PGM approved to ensure the bits drill with dimensional precision and performance when used in concrete and masonry. Rebar drilling will result in Reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank and a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.

A high performance drill bit with a superior European carbide tip to give extended durability. Rebar drilling will result in Reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank, a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.

A high quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system. Fully heat treated to eliminate bending and in a shot blast finish for rust protection.

The BlueSpot 40mm x 250mm Flat SDS plus Chisel is manufactured from carbon steel for high durability on demanding building sites and DIY applications. The product is ideal for the removal of wall and floor tiles, breaking up masonry and mortar as well as roughcasting, dirt and plaster from walls. The strengthened shaft and sharpened tip increase accuracy and longevity of the tool. The chisel is for use with an SDS drill.

For drilling small diameter holes into various types of timber and man-made boards. Made from high grade High Speed Steel for longer life, fully grounded and has up to 3x the heat resistance of standard carbon Steel bits.

A premium quality masonry heat treated bit for use in cordless and corded drill drivers in both rotary and hammer action. 130° high grade industrial carbide tip in a silver and black finish.

A high quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system. Fully heat treated to eliminate bending and in a shot blast finish for rust protection.

An economic High Speed Steel drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

The DEWALT Extreme Masonry Drill Bits offer excellent quality for all types of masonry work. They last up to 2 times longer and deliver up to 50% more holes per charge on a cordless drill than a standard masonry bit. Optimum carbide grade maximises durability.

A unique tip design provides an efficient drilling action and reduced walking for greater accuracy. Optimised milled flute offers fast drilling and the special copper brazing withstands high temperatures.

Applications: Typically used for drilling anchors, plastic plugs, fixings or pipework clearance holes.

Suitable for masonry, brick, stone, tiles and light concrete.

This DEWALT Extreme Masonry Drill Bit has the following specification:

Diameter: 7mm
Overall Length: 100mm
Working Length: 50mm

A premium quality masonry heat treated bit for use in cordless and corded drill drivers in both rotary and hammer action. 130° high grade industrial carbide tip in a silver and black finish.

A premium quality masonry heat treated bit for use in cordless and corded drill drivers in both rotary and hammer action. 130° high grade industrial carbide tip in a silver and black finish.

These DEWALT multi-material drill bits can be used in wood, masonry and metal and are ideal when drilling near to corners and edges.

The drill bits have a fully supported carbide head which gives faster drilling and a non slip shank which ensures maximum retention in chuck. They can be used in rotary or percussion drilling modes.

The DEWALT DEWDT6519QZ multi material drill bit has the following dimensions:
Size: 6mm x 123mm.

A high performance drill bit with a superior European carbide tip to give extended durability. Rebar drilling will result in Reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank, a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.

A high quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system. Fully heat treated to eliminate bending and in a shot blast finish for rust protection.

A high quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system. Fully heat treated to eliminate bending and in a shot blast finish for rust protection.

An economic High Speed Steel drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

A high performance drill bit with a superior European carbide tip to give extended durability. Rebar drilling will result in Reduced tool life. All chisel tip SDS drills can shear if the tip snags the reinforcing whilst passing alongside. This bit features a special nickel chromoly shank, a high quality European BC20 Tungsten Carbide tip. Cold formed blanks utilised up to 11mm diameter and fully heat treated to eliminate bending. Twin flute design for increased drilling performance and shot-peened for increased strength and durability.

An economic High Speed Steel drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

A high quality, cost effective drill bit suitable for use in rotary hammers with the SDS plus tool system. Fully heat treated to eliminate bending and in a shot blast finish for rust protection.

Manufactured from a high grade M2 tool Steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Fully ground from solid material and dimensionally precise. Manufactured to DIN 338.

A premium quality masonry heat treated bit for use in cordless and corded drill drivers in both rotary and hammer action. 130° high grade industrial carbide tip in a silver and black finish.

These DEWALT multi-material drill bits can be used in wood, masonry and metal and are ideal when drilling near to corners and edges.

The drill bits have a fully supported carbide head which gives faster drilling and a non slip shank which ensures maximum retention in chuck. They can be used in rotary or percussion drilling modes.

The DEWALT DEWDT6518QZ multi material drill bit has the following dimensions:
Size: 5mm x 113mm.

The DEWALT Extreme Masonry Drill Bits offer excellent quality for all types of masonry work. They last up to 2 times longer and deliver up to 50% more holes per charge on a cordless drill than a standard masonry bit. Optimum carbide grade maximises durability.

A unique tip design provides an efficient drilling action and reduced walking for greater accuracy. Optimised milled flute offers fast drilling and the special copper brazing withstands high temperatures.

Applications: Typically used for drilling anchors, plastic plugs, fixings or pipework clearance holes.

Suitable for masonry, brick, stone, tiles and light concrete.

This DEWALT Extreme Masonry Drill Bit has the following specification:
Diameter: 6.5mm
Overall Length: 100mm
Working Length: 60mm

For drilling small diameter holes into various types of timber and man-made boards. Made from high grade High Speed Steel for longer life, fully grounded and has up to 3x the heat resistance of standard carbon Steel bits.

These DEWALT multi-material drill bits can be used in wood, masonry and metal and are ideal when drilling near to corners and edges.

The drill bits have a fully supported carbide head which gives faster drilling and a non slip shank which ensures maximum retention in chuck. They can be used in rotary or percussion drilling modes.

The DEWALT DEWDT6517QZ multi material drill bit has the following dimensions:
Size: 4mm x 103mm.

The DEWALT Extreme Masonry Drill Bits offer excellent quality for all types of masonry work. They last up to 2 times longer and deliver up to 50% more holes per charge on a cordless drill than a standard masonry bit. Optimum carbide grade maximises durability.

A unique tip design provides an efficient drilling action and reduced walking for greater accuracy. Optimised milled flute offers fast drilling and the special copper brazing withstands high temperatures.

Applications: Typically used for drilling anchors, plastic plugs, fixings or pipework clearance holes.

Suitable for masonry, brick, stone, tiles and light concrete.

This DEWALT Extreme Masonry Drill Bit has the following specification:

Diameter: 6mm
Overall Length: 100mm
Working Length: 60mm

Manufactured from a high grade M2 tool Steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Fully ground from solid material and dimensionally precise. Manufactured to DIN 338.

The DEWALT Extreme Masonry Drill Bits offer excellent quality for all types of masonry work. They last up to 2 times longer and deliver up to 50% more holes per charge on a cordless drill than a standard masonry bit. Optimum carbide grade maximises durability.

A unique tip design provides an efficient drilling action and reduced walking for greater accuracy. Optimised milled flute offers fast drilling and the special copper brazing withstands high temperatures.

Applications: Typically used for drilling anchors, plastic plugs, fixings or pipework clearance holes.

Suitable for masonry, brick, stone, tiles and light concrete.

This DEWALT Extreme Masonry Drill Bit has the following specification:

Diameter: 5.5mm
Overall Length: 85mm
Working Length: 50mm

The DEWALT Extreme Masonry Drill Bits offer excellent quality for all types of masonry work. They last up to 2 times longer and deliver up to 50% more holes per charge on a cordless drill than a standard masonry bit. Optimum carbide grade maximises durability.

A unique tip design provides an efficient drilling action and reduced walking for greater accuracy. Optimised milled flute offers fast drilling and the special copper brazing withstands high temperatures.

Applications: Typically used for drilling anchors, plastic plugs, fixings or pipework clearance holes.

Suitable for masonry, brick, stone, tiles and light concrete.

This DEWALT Extreme Masonry Drill Bit has the following specification:
Diameter: 3mm
Overall Length: 110mm
Working Length: 70mm

An economic High Speed Steel drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

An economic High Speed Steel drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

The DEWALT Extreme Masonry Drill Bits offer excellent quality for all types of masonry work. They last up to 2 times longer and deliver up to 50% more holes per charge on a cordless drill than a standard masonry bit. Optimum carbide grade maximises durability.

A unique tip design provides an efficient drilling action and reduced walking for greater accuracy. Optimised milled flute offers fast drilling and the special copper brazing withstands high temperatures.

Applications: Typically used for drilling anchors, plastic plugs, fixings or pipework clearance holes.

Suitable for masonry, brick, stone, tiles and light concrete.

This DEWALT Extreme Masonry Drill Bit has the following specification:
Diameter: 4mm
Overall Length: 75mm
Working Length: 50mm

For drilling small diameter holes into various types of timber and man-made boards. Made from high grade High Speed Steel for longer life, fully grounded and has up to 3x the heat resistance of standard carbon Steel bits.

An economic High Speed Steel drill used for drilling all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

For drilling small diameter holes into various types of timber and man-made boards. Made from high grade High Speed Steel for longer life, fully grounded and has up to 3x the heat resistance of standard carbon Steel bits.

For drilling small diameter holes into various types of timber and man-made boards. Made from high grade High Speed Steel for longer life, fully grounded and has up to 3x the heat resistance of standard carbon Steel bits.

Manufactured from a high grade M2 tool Steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. The 135° split point prevents the bit from drifting and enables faster penetration. Fully ground from solid material and dimensionally precise. Manufactured to DIN 338.

An economic High Speed Steel drill used for drilling all non-alloy materials. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

An economic High Speed Steel drill used for drilling all non-alloy materials. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

An economic High Speed Steel drill used for drilling all non-alloy materials. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

An economic High Speed Steel drill used for drilling all non-alloy materials. Dimensionally precise and roll forged in a black oxide finish. Manufactured to DIN 338.

Manufactured from a high grade M2 tool Steel. This durable engineering quality drill will give a consistent rapid performance into all non-alloy materials. Fully ground from solid material and dimensionally precise. Manufactured to DIN 338.