Hand Saws

The BlueSpot 300mm Heavy Duty Hacksaw is manufactured from zinc alloy for increased durability and features die-cast aluminium handle.

The BlueSpot 150mm (6") Aluminium Junior Hacksaw is manufactured from aluminium and features a hardened and tempered carbon steel blade for increased durability and cutting power and also features an ergonomic plastic handle for increased comfort.

The Bahco 244 Hardpoint Handsaws feature a universal tooth set with high frequency hardened teeth giving up to 5x the life of conventional teeth.

Particularly effective for cross cut and rip performance on chipboard, hardboard and hardwood. The plastic handle incorporates 45º and 90º marking guides and is securely screwed to the blade.

The BlueSpot 250mm Hard point Tenon Saw is manufactured with a reinforced steel blade for increased durability. 12 teeth per inch with hardened points for increased cutting power and a large plastic handle for increased comfort and control.

The Faithfull Junior Hacksaw is a compact value for money steel framed saw for cutting light materials and best suited for smaller general sawing where the work piece cannot be firmly secured.

Fine cut - smooth, clean cutting action
Solid steel back for maximum rigidity
Ideal for tenon joints, mouldings, dowelling, coving, architraves, and skirting
Comfortable ergonomic handle incorporating 45/90* angle guide

Fleam tooth configuration cuts on both forward and reverse stroke
Rigid blade minimises whip and vibration
Ideal for mouldings, dowelling, coving, architraves, and skirting
Comfortable ergonomic handle incorporating 45/90* angle guide

Fast cut - rapid, clean cutting action
Rigid blade minimises whip and vibration
Ideal for cutting all rough sawn timber
Comfortable ergonomic handle incorporating 45/90* angle guide

Fast cut - rapid, clean cutting action
Rigid blade minimises whip and vibration
Ideal for cutting planed wood, architraves, skirting, and dado rails
Comfortable ergonomic handle incorporating 45/90* angle guide

Fast cut - smooth, clean cutting action
Rigid blade minimises whip and vibration
Ideal for cutting UPVC sills, trims, and pipes
Comfortable ergonomic handle incorporating 45/90* angle guide

Designed for straight or profile sawing of wood up to 75mm (3") thick
Traditional comfortable wooden handle
The flat section bow carries 2 blade holders both with a pin for easy blade fitting
The blade fits in the slots in the blade holder pins and can be positioned at any angle and tension is easily applied by turning the handle
Blades are fitted with the teeth pointing towards then handle and cuts on the pull stroke
Fitted with an Eclipse 14TPI Coping saw blade

Tubular steel frame is strong and durable
Alloy die cast handle for greater comfort and control when sawing
Maintains optimum blade tension to ensure accurate and straight cutting performance
Tension pieces can be realigned to enable cutting at 90° to frame axis
Fitted with an Eclipse Plus30 24TPI bimetal hacksaw blade

Tayler Tools 150mm / 6" drywall jab saw, the sharp tip excels at plunge cutting and its aggressive tooth design cuts through sheetrock fast

Bahco 239 Junior Saw is a wire framed junior hacksaw with an orange lacquered finish.
Fitted with a 32 TPI blade for metal cutting.

The Bahco 244 Hard point Handsaws feature a universal tooth set with high frequency hardened teeth giving up to five times the life of conventional teeth.
Particularly effective for cross cut and rip performance on chipboard, hardboard and hardwood. The plastic handle incorporates 45º and 90º marking guides and is securely screwed to the blade.

The Bahco 268 Mini Hacksaw is a modern junior hacksaw, with a frame made from rigid, zinc plated, flat steel and an ergonomic, plastic, pistol-grip styled handle. Replacing and tensioning of the blade is through adjustment of the nut incorporated in the handle.

Comes complete with 32 TPI low alloyed blade.

The Bahco Coping Saw ideal for cutting curves, slots and intricate shapes in many materials, wood, fibre board, plywood, plastic, laminates, glass fibre. The blades can be turned through 360º to cut any curve, and can be easily tensioned through the twist action wooden handle.

The Bahco 302 Fretsaw with a flat, plated steel frame. Fitted with a wooden beech handle, which is orange lacquered. It comes with a blade for woodworking.

The Bahco 317 Hacksaw is suitable for all-round use. It has a slim, comfortable frame design to improve access in confined spaces and to allow easier storage. The special grip at the front of the frame provides good support for the guiding hand to ensure superb performance.

The hacksaw frame has an alternative 90° blade mounting for flush cutting. It is supplied complete with a 300mm (12in) 24 TPI reliable and shatterproof Sandflex® bi-metal blade for excellent cutting performance.

Bahco ProfCut Toolbox Hardpoint Saw for medium thick materials such as timber, plywood, fibre and chipboard. Slim blade and nose for easy access.
3-side ground, super sharp GT-toothing for high cutting speed. Has a two-component handle that provides optimum user comfort.

Bahco ProfCut Laminator Saw has been specially designed for cutting laminated and wooden flooring. Has a 2-component handle that provides optimum user comfort.
The high-quality steel blade is taller and thicker than conventional blades and has fine XT hardpoint toothing, allowing a faster and straighter cut.

The BlueSpot 150mm (6") Double Edged Wallboard Saw is manufactured with a heavy-duty double blade with a sharpened point for increased cutting power. With 7 teeth per inch for increased strength and an ergonomic handle for increased comfort. Ideal for cutting plasterboard.

The BlueSpot 250mm Mini Hacksaw features a zinc alloy body for increased durability and a soft grip handle for increased comfort. Also includes carbon steel blade.

The BlueSpot 150mm (6") Coping Saw is used to cut precision shapes in wood. Complete with 5 extra blades and a soft grip cushioned handle for user comfort.

The Faithfull Tubular steel forester’s bowsaws give equally good cutting performance on dry timbers as well as green wood and are suitable for gardeners, builders, farmers and DIY etc. The sharp taper enables ease of access amongst branches and undergrowth. The lever tensioner allows easy blade replacement. Supplied with protective plastic blade sleeve.

Faithfull Tubular steel Bowsaw which gives equally good cutting performance on dry timbers as well as green wood and which is suitable for gardeners, builders, farmers and DIY etc. The lever tensioner allows easy blade replacement. Supplied with protective plastic blade sleeve.

Faithfull Tubular steel Bowsaw which gives equally good cutting performance on dry timbers as well as green wood and which is suitable for gardeners, builders, farmers and DIY etc. The lever tensioner allows easy blade replacement. Supplied with protective plastic blade sleeve.

The IRWIN Jack Universal 880 Triple Ground Hardpoint Saw is fitted with a high-quality C75 steel blade and features a unique Triple Ground tooth design offering up to 25% faster-cutting performance than traditional double ground saws. The blade is treated with a water-based lacquer providing 4x the added protection than conventional anti-rust agents.
The handle is a proven design, light and strong with an ultrasonic welded soft grip for increased hold and enhanced comfort. 90° and 45° angles integrated in the handle aid the user when marking out.

The IRWIN Jack Xpert range of handsaws have evolved into super-efficient cutting tools that have University verified technology at their heart. This triple-ground tooth technology (TGT) not only increases efficiency but also optimises cutting performance on both the push and pull strokes - so you don’t have to work so hard. This Hard point tenon saw with soft-grip handle for user comfort is the ideal choice for fine carpentry and can be used with a mitre box.

Marshalltown 6" Rock Warrior Drywall Saw; soft grip handle, tempered high carbon steel blade, bevelled point, cuts in both directions (push/pull)

The Ox Pro High Tension Hacksaw has a quick change blade design and a bi grip rubber handle. No tools are needed to change blades.

Bi grip rubber handle
6 blade angle settings
Industrial strength hacksaw

Sabretooth Fine Cut Trade Saw features triple ground ‘turbo cut’ hardpoint teeth, offering advanced cutting performance and an extended working life
- Fine cut teeth for clean cut requirements
- Triple ground 'turbo cut' teeth for advanced cutting performance
- Offset teeth for reduced friction & greater waste removal
- 0.85mm premium grade CK5 steel blade for maximum power transfer
- 45 & 90° angle guides for ease of marking out
- Dual Component cushion grip handle for comfort and control
- Stay sharp, hard point teeth for an extended working life

Sabretooth Universal Trade Saw features a triple ground ‘turbo cut’ hardpoint teeth, offering advanced cutting performance and an extended working life.
- Universal tooth pitch for a wide range of materials
- Triple ground 'turbo cut' teeth for advanced cutting performance
- Offset teeth for reduced friction & greater waste removal
- 0.85mm premium grade CK5 steel blade for maximum power transfer
- 45 & 90° angle guides for ease of marking out
- Dual Component cushion grip handle for comfort and control
- Stay sharp, hard point teeth for an extended working life

The Spear & Jackson B9822 is a fast cutting saw featuring cross ground, hard pointed teeth that are expertly heat-treated to last longer than the best of the rest. The Suregrip handle has a soft feel ergonomic grip and incorporates a handy 45 and 90-degree angle guide for a precision cut. The Predator has a rigid blade that minimises vibration and 'whip'. This saw is ideal for use on a variety of materials such as timber, hardwood, chipboard and MDF. Heat-treated teeth for a much longer life
Ideal for timber, hardwood, chipboard and MDF
Incorporates a useful 45 and 90-degree angle guide
Suregrip, soft-feel ergonomic grip and finger guide for accuracy
Rapid, clean cutting action, rigid blade minimises 'whip' and vibration

The Stanley FatMax® Concrete Saw has a specially designed blade for cutting cellular blocks and soft stone. Induction hardened teeth for increased durability. Its comfortable bi-material handle is screwed and ultrasonically welded. The handle is marked with 45° and 90° angles.