Pipes & Fittings

Straight length copper tube, 22mm in diameter and 0.9mm thick wall sold per 3m length for small domestic installations and large commercial projects.

Copper Tube Length Table in a Chrome Plated finish.

The 20 mm x 15 mm MDPE pushfit stopcock is a fully demountable and reusable push-fit system for hot and cold plumbing and radiator central heating systems. The radial sealing force provides a more secure watertight seal and the 3-pin protection feature ensures fittings are not accidentally demounted when installing through joists, floors or walls.

Wavin Hep2O silicone lubricant spray 400ml can

• Hep2O silicone lubricant spray
• Use to ease the joining of Hep2O fittings
• Ensure spray is applied only to unbagged, re-used fittings
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints

Straight length copper tube, 15mm in diameter and 0.7mm thick wall sold per 3m length for small domestic installations and large commercial projects.

Wavin Hep2O wall plate elbow 0.5"x15mm White

• Easily convert 15mm Hep2O pipe to a 1/2" connection and mount to wall
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed
• Secure demounting with HepKey system

Wavin Hep2O angled service valve 0.5"x15mm White

• Works with the Hep2O push-fit plumbing system
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed
• Secure demounting with HepKey system

Wavin Hep2O straight service valve 0.5"x15mm White

• Works with the Hep2O push-fit plumbing system
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed
• Secure demounting with HepKey system

Wavin Hep2O shut-off valve 15mm White

• Allows plumbing work to be carried out at one room or appliance without having to shut off the water for the entire house
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed
• Secure demounting with HepKey system

Wavin Hep2O appliance valve 0.75"x15mm White

• Works with the Hep2O push-fit plumbing system
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed
• Secure demounting with HepKey system

Wavin Hep2O flexible tap connector with brass nut 0.75"x15mm 300mm

• Easy connection to awkward bath and basin taps
• For intermittent hot and cold water use up to a maximum of 65°C
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed

Wavin Hep2O flexible tap connector with brass valve 0.75"x22mm 300mm

• Easy connection to awkward bath and basin taps
• For intermittent hot and cold water use up to a maximum of 65°C
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed

½" BSP swivel x 15 mm Polyplumb bent tap connector. Supplied with EPDM washer. Hand tighten nut, plus ¼ turn with spanner. NOT for central heating.. PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations.
Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler.

The Polyplumb Straight Tap Connector is a part of a hard-working and durable grey plumbing system.

Wavin Hep2O socket/socket reducer 10x15mm White

• Efficient when there is a reduction in pipe size
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed
• Secure demounting with HepKey system

Wavin Hep2O flexible tap connector with brass nut 0.5"x15mm 300mm

• Easy connection to awkward bath and basin taps
• For intermittent hot and cold water use up to a maximum of 65°C
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed

Wavin Hep2O draincock brass spigot 0.5"x15mm

• Works with the Hep2O push-fit plumbing system
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed
• Secure demounting with HepKey system

Wavin Hep2O socket/socket reducer 15x22mm White

• Efficient when there is a reduction in pipe size
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed
• Secure demounting with HepKey system

The Polyplumb is an integrated flexible plumbing system, incorporating polybutylene pipes and a complementary range of push-fit fittings. It can be used in domestic hot and cold water supply, and radiator and floor heating installations. This Polyplumb Equal Tee is a time efficient, no nonsense one step joint process that is suitable for domestic. The high performance stainless steel grab ring ensures superb joint integrity. Mad from Polybutylene and Stainless Steel.

PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations.
Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler.

Wavin Hep2O branch reduced tee 90° 22x22x15mm White

• Comprehensive range with multiple diameter and type variations
• Efficient when there is a reduction in pipe size
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed

Wavin Hep2O branch and one end reduced tee 22x15x15mm White

• Comprehensive range with multiple diameter and type variations
• Efficient when there is a reduction in pipe size
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed

Wavin Hep2O end reduced tee 22x15x22mm White

• Efficient when there is a reduction in pipe size
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed
• Secure demounting with HepKey system

One end spigot. PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations.
Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler.

The Plasson Metric-Imperial Coupler is ideally used for conveying water and other fluids in infrastructure, agriculture and horticulture applications with mechanical compression fittings tested to withstand working pressures of up to 16 bar. This coupler has impressive stress resistance and is easy to install with a leak free seal. This coupler connects to many pipe types and materials. WRAS approved.

The Polyplumb Branch Reduce Tee is a part of a hard-working and durable grey plumbing system.

PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations.
Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler.

Wavin Hep2O equal tee 22mm White

• Ideal for installation in confined spaces
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed
• Secure demounting with HepKey system

Wavin Hep2O branch reduced tee 90° 22x22x10mm White

• Comprehensive range with multiple diameter and type variations
• Efficient when there is a reduction in pipe size
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed

Wavin Hep2O branch reduced tee 90° 15x15x10mm White

• Comprehensive range with multiple diameter and type variations
• Efficient when there is a reduction in pipe size
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed

Wavin Hep2O straight tap connector with brass nut 0.75"x22mm White

• Easy to use convenient tap connector
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed
• Secure demounting with HepKey system

Wavin Hep2O equal tee 10mm White

• Ideal for installation in confined spaces
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed
• Secure demounting with HepKey system

PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations.
Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler.

Polyplumb Elbow 90 Degree in Grey.

The Polyplumb is an integrated flexible plumbing system, incorporating polybutylene pipes and a complementary range of push-fit fittings. It can be used in domestic hot and cold water supply, and radiator and floor heating installations. This Polyplumb Equal Tee is a time efficient, no nonsense one step joint process that is suitable for domestic. The high performance stainless steel grab ring ensures superb joint integrity. Mad from Polybutylene and Stainless Steel.

The Polyplumb Straight Tap Connector is a part of a hard-working and durable grey plumbing system.

Speedfit Coupling Straight Connector.

Wavin Hep2O spigot elbow 90° 10mm White

• Easy to use when space is limited
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed
• Secure demounting with HepKey system

Wavin Hep2O spigot elbow 90° 22mm White

• Easy to use when space is limited
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed
• Secure demounting with HepKey system

Wavin Hep2O elbow 90° 10mm White

• Ideal for installation in confined spaces
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed
• Secure demounting with HepKey system

Wavin Hep2O Hand-TitanTM tap connector 0.75"x22mm White

• Convenient hand-tighten tap connector
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed
• Secure demounting with HepKey system

Wavin Hep2O elbow 90° 22mm White

• Ideal for installation in confined spaces
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed
• Secure demounting with HepKey system

This Compression Reducing Coupling is easy to install as no soldering or heat is required for installation this coupling can be dismantled and rebuilt and works well at high pressures providing watertight seals.

Solder ring fittings are for use with both hot and cold water systems. The fittings have been pre-soldered with a small ring just inside each end.

Wavin Hep2O straight tap connector with brass nut 0.5"x15mm White

• Easy to use convenient tap connector
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed
• Secure demounting with HepKey system

Wavin Hep2O equal tee 15mm White

• Ideal for installation in confined spaces
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed
• Secure demounting with HepKey system

This Compression Coupling is ideal for joining two copper or plastic plumbing pipes.

Wavin Hep2O straight connector 10mm White

• Ideal for installation in confined spaces
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed
• Secure demounting with HepKey system

Wavin Hep2O demountable stopend 22mm White

• Easy to use, removable end caps
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed
• Secure demounting with HepKey system

Wavin Hep2O socket reducer 15x10mm White

• Efficient when there is a reduction in pipe size
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed
• Secure demounting with HepKey system

PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations.
Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler.

This Speedfit Reducing Coupling is used in the connection of copper to copper pipe, plastic to plastic pipe or copper to plastic pipe. The fittings simply push onto the pipe and then the plastic nut is twisted clockwise to lock the fitting in place. The pipe must be cut straight to ensure a good connection is made.

The Polyplumb Socket Blank End is a part of a hard-working and durable grey plumbing system.

15 mm x 1/2" BSP parallel male Polyplumb tank connector. Colour: grey. Supplied with EPDM washer. Hand tighten. for cold water. PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations.
Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler.

End Feed 90 Degree Street Elbow made from copper.

Wavin Hep2O straight connector 22mm White

• Ideal for installation in confined spaces
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed
• Secure demounting with HepKey system

PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations.
Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler.

Wavin Hep2O demountable stopend 10mm White

• Easy to use, removable end caps
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed
• Secure demounting with HepKey system

Wavin Hep2O Hand-TitanTM tap connector 0.5"x15mm White

• Convenient hand-tighten tap connector
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed
• Secure demounting with HepKey system

Polyplumb Straight Coupler in Grey.

Polyplumb Elbow 90 Degree in Grey.

Speedfit Coupling Straight Connector.

Wavin Hep2O socket reducer 22x15mm White

• Efficient when there is a reduction in pipe size
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed
• Secure demounting with HepKey system

Wavin Hep2O demountable stopend 15mm White

• Easy to use, removable end caps
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed
• Secure demounting with HepKey system

22 x 15 mm socket reducing, grey. Supplied with reinforcing sleeve. Spigot x socket. NOT suitable for use with compression fittings. PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations. Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler. NOT suitable for use with compression fittings.

Wavin Hep2O spigot elbow 90° 15mm White

• Easy to use when space is limited
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed
• Secure demounting with HepKey system

Wavin Hep2O elbow 90° 15mm White

• Ideal for installation in confined spaces
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed
• Secure demounting with HepKey system

End Feed Equal Tee made from copper.

This Compression Reducing Coupling is easy to install as no soldering or heat is required for installation this coupling can be dismantled and rebuilt and works well at high pressures providing watertight seals.

Solder Ring Reducing Coupling.

10 mm Demountable Socket Blank End Polyplumb is the fast and permanent grey plastic pushfit system for domestic hot and cold water supply, radiator and floor heating installations. Fittings feature stainless steel grab ring and are demountable only by disassembling, reducing the potential for tampering. PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations.
Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler.

End Feed Straight Tap Connector made from copper.

This Compression Coupling is ideal for joining two copper or plastic plumbing pipes.

End Feed Straight Tap Connector made from copper.

Polyplumb is an integrated flexible plumbing system, incorporating polybutylene pipes and a complimentary range of push-fit fittings. It can be used in hot and cold water supply, and radiator and floor heating installations. It is a fast, reliable and permanent fitting being used for over 30 years and provides a superb combination of fast fitting with a permanent, reliable fix. Polyplumb offers a one-step joint process, with joint integrity assured by a high performance, stainless steel grab ring within the fitting. Polyplumb can only be demounted by dis-assembly, reducing the risk of tampering. The system offers a number of benefits, including a high performance stainless steel grab ring ensures superb joint integrity. This system is time efficient, no nonsense one step joint process and is demountable only by dis-assembling, reducing potential for tampering.

Solder Ring Stop end.

The Polyplumb Socket Blank End is a part of a hard-working and durable grey plumbing system.

Polyplumb Straight Coupler in Grey.

This Speedfit Coupling is used in the connection of copper to copper pipe, plastic to plastic pipe or copper to plastic pipe. The fittings simply push onto the pipe and then the plastic nut is twisted clockwise to lock the fitting in place. The pipe must be cut straight to ensure a good connection is made.

Wavin Hep2O straight connector 15mm White

• Ideal for installation in confined spaces
• Hot and cold flexible push-fit plumbing system
• In4Sure joint recognition for secure joints
• Feel the rumble, leak free connection guaranteed
• Secure demounting with HepKey system

Solder Ring Reducing Coupling.

This Compression Reducing Coupling has a quick installation and disassembly and is widely used with copper pipe, PE and PEX material pipe and can be reused with new ring.

This Compression Reducing Coupling has a quick installation and disassembly and is widely used with copper pipe, PE and PEX material pipe and can be reused with new ring.

End Feed Equal Tee made from copper.

End Feed Reducing Tee made from copper.

This compression fitting are suitable for use on a wide variety of applications, including central heating and hot & cold water supplies. Compression Fittings do not require the use of solder, are ideal for use in areas with limited space, and are a cost effective but robust solution.

End Feed Equal Tee made from copper.

90 Degree End Feed Elbow made from copper.

This Compression Reducing Coupling is easy to install as no soldering or heat is required for installation this coupling can be dismantled and rebuilt and works well at high pressures providing watertight seals.

This Speedfit Coupling is used in the connection of copper to copper pipe, plastic to plastic pipe or copper to plastic pipe. The fittings simply push onto the pipe and then the plastic nut is twisted clockwise to lock the fitting in place. The pipe must be cut straight to ensure a good connection is made.

End Feed Straight Tap Connector made from copper.

This Compression Coupling is ideal for joining two 10mm copper or plastic plumbing pipes.

This Speedfit Coupling is used in the connection of copper to copper pipe, plastic to plastic pipe or copper to plastic pipe. The fittings simply push onto the pipe and then the plastic nut is twisted clockwise to lock the fitting in place. The pipe must be cut straight to ensure a good connection is made.

Solder Ring Coupling.

22 mm Spigot Blank End Polyplumb is the fast and permanent grey plastic pushfit system for domestic hot and cold water supply, radiator and floor heating installations. Fittings feature stainless steel grab ring and are demountable only by disassembling, reducing the potential for tampering. PolyPlumb is a permanent grey plastic push-fit system for domestic hot and cold water supply, radiator and underfloor heating installations.
Pipe stiffeners must be used when using plastic pipe; these are not required for copper pipe. PolyPlumb must not be used for gas, oil, compressed air,solar heating, primary or gravity pipework from a solid fuel back boiler.

Suitable for use above ground and on hot or cold domestic systems. The end feed joint is made when copper tube is inserted into the fitting, the joint heated to the correct temperature, and solder applied until the joint becomes molten.

Compatible with Copper Tube to BS EN 1057
Manufactured to EN1254-2
Easy to install

Coupling for a Waste Outlet.

End Feed Reducing Tee made from copper.

End Feed Fitting Reducer made from copper.

This Compression Coupling is ideal for joining two copper or plastic plumbing pipes.