Saw & Planer Blades

Trend Craft Pro 250mm diameter 30mm bore 48 tooth general purpose saw blade for table saws. Designed for a professional finish in soft wood, hard wood, plywood, soft fibre, plasterboard stone, fibre board, cement bonded board and particle board.

Trend Craft Pro 190mm diameter 30mm borer 40 tooth heneral purpose saw blade. Designed for a professional finish in soft wood, hard wood, plywood, soft fibre, plasterboard stone, fibre board, cement bonded board and particle board.

Trend Craft Pro 190mm diameter 30mm bore 24 tooth combination saw blade, perfect for a professional finish in soft wood, hard wood, exotic rip, plasterboard, stone fibre board and particle board. Microgranular Tungsten Carbide Tipped to allow cutting of abrasive materials.

Trend Craft Pro saw blade 184mm diameter 30mm bore 24 tooth TCT is the perfect replacement blade for 184mm diameter mains powered circular saws. With 24 tooth ATB (Alternate Top Bevel) configuration ideal for general purpose ripping and crosscut work.

Trend Craft Pro 165mm diamater 20mm bore 48 tooth fine finish cut blade is designed for a professional finish insoft wood, hard wood, plywood, soft fibre, plasterboard stone, fibre board, cement bonded board and particle board.

Trend Craft Pro 160mm diamater 20mm bore 48 tooth fine finish cut blade is designed for a professional finish in particle board, boards veneered both sides, plywood MDF, chipboard laminated one-sided, veneer and hardboard. Suitable for Festool TS55, Scheppach PL55, CS55.

The Titan retractable knife is ideal for precision cutting of the most flexible to the most resistant materials, such as paper, cardboard, plastic or leather.
The lightweight aluminium body has a strong brass wheel for efficient locking of the blade.
Supplied with 3 blades.

High carbon Steel Jigsaw Blades providing a Straight Coarse cut, suitable for all Woods. The High carbon Steel body has high strength at lower temperatures. Side Set and sharpened gives a fast, medium cut.

High Speed Steel Jigsaw Blade providing a Straight Fine Cut, suitable for pipes, profiles, sheet Metal, thin sheet Metal and non-ferrous Metals. The High speed Steel body has high strength at higher temperatures. Ideal for high heat generating materials such as mild Steel and other Metal. Milled and wavy Set teeth give a fine, Straight cut.

High Speed Steel Jigsaw Blade providing a Straight Fine Cut, suitable for pipes, profiles, sheet Metal, thin sheet Metal and non-ferrous Metals. The High speed Steel body has high strength at higher temperatures. Ideal for high heat generating materials such as mild Steel and other Metal. Milled and wavy Set teeth give a fine, Straight cut.

The Stanley STA210099 has a retractable blade and a grey painted die-cast metal frame. It is an ideal tool for Carpenters, Decorators, Artists or any small home DIY works. It has 5 different blade positions which can be controlled by a blade shifter. The variety in blade positions makes it perfect for cutting a variety of depths. The blade has an interlocking nose which firmly locks the blade in any of the 5 positions you need. Once you have finished with the knife the blade can then be full and safety retracted back into the frame. Supplied as a single unit with 3 spare blades.

Professional TCT Thin Kerf blades designed for cordless machines to reduce power drain. The thin kerf increases efficiency and runtime on cordless machines. These quality blades feature an Alternate Top Bevel (ATB) tooth configuration for the professional tradesman and the front bevel tooth form is for a superior quality of cut. The unique 'gold' coating creates ultra low friction and wear resistance. The blades are body hardened and tempered to maintain trueness. Anti-kickback is for smooth action and safety during use. These blades have a reamed bored ensuring precise fit to spindles. They are suitable for use on rip saws and are in available in sizes from 120mm to 190mm diameter for coarse cutting through to fine cutting of softwood, hardwood, particle board, MDF, hardboard and plywood.

Professional TCT Thin Kerf blades designed for cordless machines to reduce power drain. The thin kerf increases efficiency and runtime on cordless machines. These quality blades feature an Alternate Top Bevel (ATB) tooth configuration for the professional tradesman and the front bevel tooth form is for a superior quality of cut. The unique 'gold' coating creates ultra low friction and wear resistance. The blades are body hardened and tempered to maintain trueness. Anti-kickback is for smooth action and safety during use. These blades have a reamed bored ensuring precise fit to spindles. They are suitable for use on rip saws and are in available in sizes from 120mm to 190mm diameter for coarse cutting through to fine cutting of softwood, hardwood, particle board, MDF, hardboard and plywood.

The Starrett A2 Arbor is suitable for use with holesaw sizes ranging from Ø32-210mm. Fitted with a 6.5mm/1/4in pilot drill, with set screw in the arbour body allowing easy replacement of the pilot drill. For use with FCW Holesaws.

Suitable for use with Holesaw sizes ranging from 14-30mm. Fitted with a 6.5mm/1/4 in pilot drill, with set screw in the arbour body allowing easy replacement of the pilot drill. For use with FCW Holesaws.

Stanley reversible sharpened double hook with point for penetrating and cutting sheet material, in particular floor covering and plastic sheeting

The Stanley 1992B blades are heavy-duty, general purpose blades, which fit all standard Stanley knives. The trapezoid shaped blades are highly resistant and reversible.
These blades are ideal for carpet, vinyl and any other material requiring a stiffer and stronger blade.

These 18 mm snap-off blades have a straight cutting edge and 7 snap-off sections.
They are suitable for use with the following knives: STA010481, STA010418, STA010018, STA010380, STA010280, STA010151.

These 9 mm snap-off blades have a straight cutting edge and 7 snap-off sections.
They are suitable for use with the following knives: STA010481, STA010418, STA010018, STA010380, STA010280, STA010151.

The Stanley FatMax® Concrete Saw has a specially designed blade for cutting cellular blocks and soft stone. Induction hardened teeth for increased durability. Its comfortable bi-material handle is screwed and ultrasonically welded. The handle is marked with 45° and 90° angles.

Replacement blade for Stanley STA 010129 saw knife and STA 010020, STA 010010, STA010199, STA010019 and 010550 knife handles.
For cutting metal in restricted areas or for cutting curved shapes.

Replacement blade for Stanley STA 010129 saw knife and STA 010020, STA 010010, STA010199, STA010019 and 010550 knife handles.
For sawing wood in restricted areas or for cutting curved shapes

The Stanley 601 series are disposable craft knife, these are ideal for precision work on card, plastic, and for many craft applications.

The tapered plastic body allows precision blade control, and the blades are protected by a plastic guard to ensure safety and a longer life.
When the life of the knife has been reached you simply dispose of the knife in the correct re-cycling system, as the blades are moulded to the handle are not replaceable.

Professional TCT blades featuring an Alternate Top Bevel (ATB) tooth configuration for a professional finish and long cutting life. Front bevel tooth form is for a superior quality of cut & the unique gold' coating creates ultra low friction and wear resistance. The blades are body hardened and tempered to maintain trueness. Cooling slots in blade negate heat build up and also assist in clearing the swarf making the blades great for continuous use. A reamed bore ensures precise fit to the spindle. Range includes blades from 150mm to 305mm diameter for coarse cutting through to fine cutting of softwood, hardwood, particle board, MDF, hardboad and plywood. Suitable for wood with nails on blades with up to 40 teeth.

Professional TCT blades featuring an Alternate Top Bevel (ATB) tooth configuration for a professional finish and long cutting life. Front bevel tooth form is for a superior quality of cut & the unique gold' coating creates ultra low friction and wear resistance. The blades are body hardened and tempered to maintain trueness. Cooling slots in blade negate heat build up and also assist in clearing the swarf making the blades great for continuous use. A reamed bore ensures precise fit to the spindle. Range includes blades from 150mm to 305mm diameter for coarse cutting through to fine cutting of softwood, hardwood, particle board, MDF, hardboad and plywood. Suitable for wood with nails on blades with up to 40 teeth. 

Professional TCT blades featuring an Alternate Top Bevel (ATB) tooth configuration for a professional finish and long cutting life. Front bevel tooth form is for a superior quality of cut & the unique gold' coating creates ultra low friction and wear resistance. The blades are body hardened and tempered to maintain trueness. Cooling slots in blade negate heat build up and also assist in clearing the swarf making the blades great for continuous use. A reamed bore ensures precise fit to the spindle. Range includes blades from 150mm to 305mm diameter for coarse cutting through to fine cutting of softwood, hardwood, particle board, MDF, hardboad and plywood. Suitable for wood with nails on blades with up to 40 teeth. 

The Spear & Jackson B9822 is a fast cutting saw featuring cross ground, hard pointed teeth that are expertly heat-treated to last longer than the best of the rest. The Suregrip handle has a soft feel ergonomic grip and incorporates a handy 45 and 90-degree angle guide for a precision cut. The Predator has a rigid blade that minimises vibration and 'whip'. This saw is ideal for use on a variety of materials such as timber, hardwood, chipboard and MDF. Heat-treated teeth for a much longer life
Ideal for timber, hardwood, chipboard and MDF
Incorporates a useful 45 and 90-degree angle guide
Suregrip, soft-feel ergonomic grip and finger guide for accuracy
Rapid, clean cutting action, rigid blade minimises 'whip' and vibration

A tough tungsten grit rod saw blade ideal for cutting ceramic and glazed tiles, designed to cut difficult shapes from ceramic tiles and similar material, for use with hacksaw frames.

Sabretooth Universal Trade Saw features a triple ground ‘turbo cut’ hardpoint teeth, offering advanced cutting performance and an extended working life.
- Universal tooth pitch for a wide range of materials
- Triple ground 'turbo cut' teeth for advanced cutting performance
- Offset teeth for reduced friction & greater waste removal
- 0.85mm premium grade CK5 steel blade for maximum power transfer
- 45 & 90° angle guides for ease of marking out
- Dual Component cushion grip handle for comfort and control
- Stay sharp, hard point teeth for an extended working life

Sabretooth Fine Cut Trade Saw features triple ground ‘turbo cut’ hardpoint teeth, offering advanced cutting performance and an extended working life
- Fine cut teeth for clean cut requirements
- Triple ground 'turbo cut' teeth for advanced cutting performance
- Offset teeth for reduced friction & greater waste removal
- 0.85mm premium grade CK5 steel blade for maximum power transfer
- 45 & 90° angle guides for ease of marking out
- Dual Component cushion grip handle for comfort and control
- Stay sharp, hard point teeth for an extended working life

High carbon steel (HCS) Reciprocating Saw Blades are suitable for brick and aircrete block. The HCS body has high strength at lower temperatures. Combining the flexibility of a HCS body with Tungsten Carbide Tip (TCT) cutting edge resulting in a tough blade which keeps its edge.

Comprehensive set of sabre blades to cover a multitude of cutting requirements into wood, metal and plastic.

Tough metal construction with rubber grip handle
Accepts most standard utility blades
Blade storage in handle

The Ox Speed Skim Stainless Flex Blade has an ultra-fine 0.3mm stainless steel blade that gives a fine finish to plaster, drywall & tape as well as jointing procedures.

General purpose heavy duty blades in dispenser
High quality sk2 steel
Extra flexible and durable

General purpose heavy duty blades in dispenser
High quality sk2 steel
Extra flexible and durable

The Ox Pro Fixed Blade Folding Knife is a retractable blade with 2 spare blades stored in the handles that can be quickly changed. The Ox folding Knife has a compact foldable design with a non-slip ergonomic grip.

The Ox Pro Heavy Duty Retractable Knife has a magnetic tip and firm grip handle with quick blade changing that accepts most standard utility blades with storage in the handle for the blade dispenser. 10 blades included.

The Ox Pro 12"" Hacksaw Blades can cut aluminium, iron, copper, carbon steel and hard plastic. Pack of 4 blades.

Bi grip rubber handle
6 blade angle settings
Industrial strength hacksaw

The Ox Pro High Tension Hacksaw has a quick change blade design and a bi grip rubber handle. No tools are needed to change blades.

The Ox Pro Hand Sander is a lightweight sander with a fast changing sandpaper design and soft grip handle with a bonded foam pad.

The Ox Pro Tapping Knife has a high quality flexible stainless steel blade, a DURAGRIP soft handle for extreme comfort and a strong aluminium back.

Flexible stainless steel blade
Built-in hammer end
Duragrip soft handle for extreme comfort

The Ox Pro Joint Knife has a flexible stainless steel blade, a built-in hammer end and a DURAGRIP soft handle for extreme comfort.

The Ox Pro Joint Knife has a flexible stainless steel blade, a built-in hammer end and a DURAGRIP soft handle for extreme comfort.

The Ox Pro Joint Knife has a flexible stainless steel blade, a built-in hammer end and a DURAGRIP soft handle for extreme comfort.

The Ox Pro Joint Knife has a flexible stainless steel blade, a built-in hammer end and a DURAGRIP soft handle for extreme comfort.

The OX Speed Skim Stainless Flex Blade has an ultra-fine 0.3mm stainless steel blade that gives a fine finish to plaster, drywall & tape as well as jointing procedures.

Replacement blade complete with integral blade guard and spare end caps.

Replacement blade complete with integral blade guard and spare end caps.

Normex professional folding knife in stainless steel with belt clip and a lockable blade. Includes 5 blades.

Marshalltown 6" Rock Warrior Drywall Saw; soft grip handle, tempered high carbon steel blade, bevelled point, cuts in both directions (push/pull)

Comprehensive Set of jigsaw Blades to cover a multitude of cutting requirements into Wood, Metal and Plastic.

These high carbon steel (HCS) Jigsaw Blades providing a straight clean cut, suitable for softwood, laminate board and plastic. The HCS body has high strength at lower temperatures. Grout & taper ground (GTG) teeth give a clean quick cut.

High carbon steel (HCS) Jigsaw Blades providing a straight clean cut, suitable for softwood and insulation. The HCS body has high strength at lower temperatures. Milled & Wavy set (MWS) teeth give a fine, straight cut.

High carbon steel (HCS) Jigsaw Blades providing a curved clean cut, suitable for softwood and insulation. The HCS body has high strength at lower temperatures. Milled & Wavy set (MWS) teeth give a fine, straight cut.

High carbon Steel Jigsaw Blades providing a curved Coarse cut, suitable for all Woods. The High carbon Steel body has high strength at lower temperatures. Side Set & sharpened teeth give a fast, medium cut.

High carbon Steel Jigsaw Blades providing a Straight Coarse cut, suitable for softwood and Plastic. The High carbon Steel body has high strength at lower temperatures. Milled and Side Set Teeth give a quick and fairly rough cut.

These high carbon Steel Jigsaw Blades providing a Straight clean cut, suitable for all Woods and Plastic. The High carbon Steel body has high strength at lower temperatures. Grout and taper Ground teeth give a clean quick cut.

These high carbon Steel Jigsaw Blades providing a Straight clean cut, suitable for softwood, laminate board and Plastic. The High carbon Steel body has high strength at lower temperatures. Grout and taper Ground teeth give a clean quick cut.

High carbon steel (HCS) Jigsaw Blades providing a straight coarse cut, suitable for glass fibre, plasterboard and cement board. The HCS body has high strength at lower temperatures. Combining the flexibility of a HCS body with Tungsten Carbide Tip (TCT) cutting edge resulting in a tough blade which keeps its edge.

High Speed Steel (HSS) Jigsaw Blade providing a straight clean cut, suitable for thin sheet metals. The HSS body has high strength at higher temperatures. Ideal for high heat generating materials such as mild steel and other metals. Milled & wavy set (MWS) teeth give a fine, straight cut.

High Speed Steel (HSS) Jigsaw Blade providing a curved fine cut, suitable for thin sheet metals and steel. The HSS body has high strength at higher temperatures. Ideal for high heat generating materials such as mild steel and other metals. Milled & wavy set (MWS) teeth give a fine, straight cut.

High Speed Steel Jigsaw Blade providing a Straight clean cut, suitable for thin sheet Metals, aluminium, Steel and Plastic. The high speed Steel body has high strength at higher temperatures. Ideal for high heat generating materials such as mild Steel and other Metals. Milled and side Set teeth give a quick and fairly rough cut.

The IRWIN Jack Xpert range of handsaws have evolved into super-efficient cutting tools that have University verified technology at their heart. This triple-ground tooth technology (TGT) not only increases efficiency but also optimises cutting performance on both the push and pull strokes - so you don’t have to work so hard. This Hard point tenon saw with soft-grip handle for user comfort is the ideal choice for fine carpentry and can be used with a mitre box.

The IRWIN Jack Universal 880 Triple Ground Hardpoint Saw is fitted with a high-quality C75 steel blade and features a unique Triple Ground tooth design offering up to 25% faster-cutting performance than traditional double ground saws. The blade is treated with a water-based lacquer providing 4x the added protection than conventional anti-rust agents.
The handle is a proven design, light and strong with an ultrasonic welded soft grip for increased hold and enhanced comfort. 90° and 45° angles integrated in the handle aid the user when marking out.

The Irwin 618R Sabre Saw Blades have superior construction and design making them faster cutting and longer lasting. Cuts all metals including nonferrous, pipe conduit, stainless and sheet metal.

Cuts all metals including nonferrous, pipe conduit, stainless and sheet metal. Suitable for use with materials 1.5 to 10mm (1/16 inch to 3/8 inch) thick, dependent on the TPI of the blade.

Irwin Sabre Saw Blades 810R Metal & Wood offer superior construction and design making them faster cutting and longer lasting. The Irwin reciprocating range includes labelling on the blade, which makes it easy to identify the right blade for the right application. These Metal and Wood Cutting blades are suitable for cutting composition materials such as plastic, wood, carbon steel and stainless steel. Suitable for materials which are 3.2mm (1/8in) and thicker.

Irwin Sabre Saw Blades 610R 150mm Metal & Wood Cutting blades offer superior construction and design making them faster cutting and longer lasting. Cuts composition materials such as plastic, pipe, carbon steel and stainless steel. Suitable for use with materials 3.2mm (1/8 in) and thicker.

Irwin Sabre Saw Blades 606R Wood Cutting have superior construction and design making them faster cutting and longer lasting. For fast cutting wood, composition material and plastic and suitable for use with materials 5 mm (3/16 Inch) and thicker.

Irwin Jigsaw Metal Cutting Blades have fully hardened high speed steel for use in metal, aluminium, and no-ferrous metal. HSS milled teeth provide longer life and fast cuts in metal. Fast and even cuts in thin and thick metal. T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws. Straight cuts in metal, non-ferrous metal and aluminium.

These Irwin Wood Jigsaw Blades are made from Carbon steel for use in softer materials such as wood, laminated chipboard, and plastics. They have 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications.

These Irwin Wood Jigsaw Blades are made from Carbon steel for use in softer materials such as wood, laminated chipboard, and plastics. They have 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications.

These Irwin Wood Jigsaw Blades are made from Carbon steel for use in softer materials such as wood, laminated chipboard, and plastics. They have 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications.

Irwin Jigsaw Metal Cutting blades. T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws. Fast, straight cuts in aluminium 4-15mm, plastic 4-30mm, non-ferrous metal, metal 4-6mm, fiberglass, lead, tin 4-20mm.

Irwin Jigsaw Metal Cutting blades. T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws. Fast, straight cuts in aluminium 4-15mm, plastic 4-30mm, non-ferrous metal, metal 4-6mm, fiberglass, lead, tin 4-20mm.

These Irwin Wood Jigsaw Blades are made from Carbon steel for use in softer materials such as wood, laminated chipboard, and plastics. They have 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications.

These Irwin Wood Jigsaw Blades are made from Carbon steel for use in softer materials such as wood, laminated chipboard, and plastics. They have 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications.

These Irwin Wood Jigsaw Blades are made from Carbon steel for use in softer materials such as wood, laminated chipboard, and plastics. They have 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications.

These Irwin Wood Jigsaw Blades are made from Carbon steel for use in softer materials such as wood, laminated chipboard, and plastics. They have 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications.

These Irwin Wood Jigsaw Blades are made from Carbon steel for use in softer materials such as wood, laminated chipboard, and plastics. They have 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications.

These Irwin Wood Jigsaw Blades are made from Carbon steel for use in softer materials such as wood, laminated chipboard, and plastics. They have 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications.

High carbon steel (HCS) Reciprocating Saw Blades are suitable for all wood, man-made board and plastic. The HCS body has high strength at lower temperatures. Side set & sharpened (SSS) teeth give a fast, medium cut.

Ideal for fast, clean, effortless cuts through construction, wood, boards, chipboard, MDF, plywood and plastic. The high carbon steel body has high strength at lower temperatures. Ideal for low heat generating materials such as wood and plastic.

High carbon steel (HCS) Reciprocating Saw Blades are suitable for all wood, man-made board and plastic. The HCS body has high strength at lower temperatures. Side set & sharpened (SSS) teeth give a fast, medium cut.

Faithfull Tubular steel Bowsaw which gives equally good cutting performance on dry timbers as well as green wood and which is suitable for gardeners, builders, farmers and DIY etc. The lever tensioner allows easy blade replacement. Supplied with protective plastic blade sleeve.

This Faithfull Contract Diamond Blade has 7mm sintered, diamond impregnated segments. Suitable for wet and dry cutting, and ideal for general cutting applications such as tiles, paving slabs, breeze blocks and brickwork.

The Faithfull solid tungsten carbide planer blades are designed for use with portable electric planers with an 82mm cutting block and suitable clamping system. Blades are manufactured from high quality tungsten carbide and provide excellent performance in both timber and man-made boards. Blades are supplied in pairs and are reversible to provide an extended working life.

Faithfull peg tooth bowsaw blade for general cutting work in dry wood, and green wood suitable for gardeners, builders, farmers and D.I.Y. Suitable for use in most types of bowsaw in the UK market.

Faithfull peg tooth bowsaw blade for general cutting work in dry wood, and green wood suitable for gardeners, builders, farmers and D.I.Y. Suitable for use in most types of bowsaw in the UK market.

Faithfull Tubular steel Bowsaw which gives equally good cutting performance on dry timbers as well as green wood and which is suitable for gardeners, builders, farmers and DIY etc. The lever tensioner allows easy blade replacement. Supplied with protective plastic blade sleeve.

The Faithfull Tubular steel forester’s bowsaws give equally good cutting performance on dry timbers as well as green wood and are suitable for gardeners, builders, farmers and DIY etc. The sharp taper enables ease of access amongst branches and undergrowth. The lever tensioner allows easy blade replacement. Supplied with protective plastic blade sleeve.

Faithfull peg tooth bowsaw blade for general cutting work in dry wood, and green wood suitable for gardeners, builders, farmers and D.I.Y. Suitable for use in most types of bowsaw in the UK market.

The Eclipse Plus 30 Flexible BiMetal High Speed Steel Hacksaw Blade is a virtually unbreakable blade for superb cutting performance, wear resistance and safety. A combination of an M2 high speed ground cutting edge, electron beam welded to a flexible alloy back gives a level of cutting power and flexibility that is far superior to edge hardened or conventional flexible blades. The unique ground tooth profile of the Plus 30 blade produces a faster and more aggressive cutting action that requires less effort and is more efficient than a standard blade. Cuts through all types of metals including alloy and stainless steel. Box of 100, 24 tpi

These DEWALT HCS Jigsaw Blades are made from High Carbon Steel (HCS) and have been engineered to deliver a quality cut in a variety of materials, including wood, laminates and plastics.

These DEWALT DT2168 (T101AO) Scroller Blades are ideal for fine, curve cutting in wood, chipboard, plywood, laminated chipboard & plastic up to 30mm thick.

These DEWALT HCS Jigsaw Blades are made from High Carbon Steel (HCS) and have been engineered to deliver a quality cut in a variety of materials, including wood, laminates and plastics.

The DEWALT DT2166 (T144D) HCS Wood Jigsaw Blades are ideal for fast, straight cuts in wood and chipboard up to 60mm thick.

These DEWALT HCS Jigsaw Blades are made from High Carbon Steel (HCS) and have been engineered to deliver a quality cut in a variety of materials, including wood, laminates and plastics.

The DEWALT DT2165 (T101B) HCS Wood Jigsaw Blades are ideal for clean straight fine cuts in wood, chipboard, plywood, laminated chipboard & plastic up to 30mm thick.

These DEWALT HCS Jigsaw Blades are made from High Carbon Steel (HCS) and have been engineered to deliver a quality cut in a variety of materials, including wood, laminates and plastics.

The DEWALT DT2164 (T101D) HCS Wood Jigsaw Blades are ideal for clean, straight cuts in wood, chipboard, plywood, laminated chipboard & plastic up to 60mm thick.