Screws

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power. NOTE: Sharp point only.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Used to secure plasterboard to timber stud work.

• Phillips No.2 recess for a positive drive
• Bugle head to reduce likelihood of damaging the board surface
• 25° super sharp point for ease of penetration
• Coarse thread for extreme hold

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power. NOTE: Sharp point only.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Spax wirox washer head screw ideal for timber constructions and constructing stairways.

Special features
Washer Head: Ensures higher pull through forces, allowing for larger screw distances.
Wirox A9J: Wirox surface has high protection against corrosion and is free from chromium-VI making it more environmentally friendly.
T-Star plus: Positive and secure fit of the BIT and better driving, e.g when working overhead.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood-dependent), its point effectively reduces the spliting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.
4CUT cutter: Starting at screw lengths of 160mm, the special moulding at the thread run out of partial thread screws significantly reduces the screwing-in torque.

Box of 200 M3 X 25mm black drywall screws. Coarse thread specialist screw with countersunk Phillips head. Screws are made from fully hardened C1022 steel and black phosphate finish. Uses include drywall applications, fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. Extra deep insert bit recess offering a firmer positive drive. Extremely sharp piercing point. Thread gives speedy insertion and improved holding power. Bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking, and minimises damage to the surface enabling a smoother surface finish.

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

3mm x 15mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Used to secure plasterboard to timber stud work.

• Phillips No.2 recess for a positive drive
• Bugle head to reduce likelihood of damaging the board surface
• 25° super sharp point for ease of penetration
• Coarse thread for extreme hold

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Used to secure plasterboard to timber stud work.

• Phillips No.2 recess for a positive drive
• Bugle head to reduce likelihood of damaging the board surface
• 25° super sharp point for ease of penetration
• Coarse thread for extreme hold

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

4.5mm x 25mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

4mm x 35mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

Used to secure plasterboard to timber stud work.

• Phillips No.2 recess for a positive drive
• Bugle head to reduce likelihood of damaging the board surface
• 25° super sharp point for ease of penetration
• Coarse thread for extreme hold

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Used when fixing roofing and cladding sheets to timber purlins.

• For medium duty rust protection
• Conforms to Eurocode 5 and service class 2

Used when fixing roofing and cladding sheets to timber purlins.

• For medium duty rust protection
• Conforms to Eurocode 5 and service class 2

Used when fixing roofing and cladding sheets to timber purlins.

• For medium duty rust protection
• Conforms to Eurocode 5 and service class 2

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

4.5mm x 25mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments. Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw and ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments. Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw and ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

5mm x 25mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

4.5mm x 35mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments. Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw and ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments. Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw and ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

4mm x 45mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

A single thread woodscrew mainly used in various types of timber and man-made boards or or into masonry with the use of a plastic plug.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

4.5mm x 40mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

5mm x 35mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments. Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw and ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments. Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw and ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Used to secure plasterboard to timber stud work.

• Phillips No.2 recess for a positive drive
• Bugle head to reduce likelihood of damaging the board surface
• 25° super sharp point for ease of penetration
• Coarse thread for extreme hold

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments. Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw and ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.