Screws

A fully threaded, grade 8.8 high tensile set screw used in a wide variety of applications. NOTE: Nuts not included.

• Plated in Trivalent Chromium (Cr3) Zinc
• Manufactured from grade 8.8 carbon steel

A fully threaded, grade 8.8 high tensile set screw used in a wide variety of applications. NOTE: Nuts not included.

• Plated in Trivalent Chromium (Cr3) Zinc
• Manufactured from grade 8.8 carbon steel

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A fully threaded, grade 8.8 high tensile set screw used in a wide variety of applications. NOTE: Nuts not included.

• Plated in Trivalent Chromium (Cr3) Zinc
• Manufactured from grade 8.8 carbon steel

A fully threaded, grade 8.8 high tensile set screw used in a wide variety of applications. NOTE: Nuts not included.

• Plated in Trivalent Chromium (Cr3) Zinc
• Manufactured from grade 8.8 carbon steel

A fully threaded, grade 8.8 high tensile set screw used in a wide variety of applications. NOTE: Nuts not included.

• Plated in Trivalent Chromium (Cr3) Zinc
• Manufactured from grade 8.8 carbon steel

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A fully threaded, grade 8.8 high tensile set screw used in a wide variety of applications. NOTE: Nuts not included.

• Plated in Trivalent Chromium (Cr3) Zinc
• Manufactured from grade 8.8 carbon steel

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A fully threaded, grade 8.8 high tensile set screw used in a wide variety of applications. NOTE: Nuts not included.

• Plated in Trivalent Chromium (Cr3) Zinc
• Manufactured from grade 8.8 carbon steel

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and HAMMER fixings.

• Designed to replace traditional masonry fixings
• TX30 TX Drive recess to reduce driver wear & prevent camming-out
• Serrated V-threads to achieve optimum insertion into all masonry types
• Zinc plated and yellow passivated for increased corrosion resistance
• High-Low thread on first 30mm to aid insertion and reduce torque
• Ideal for fitting windows and door frames
• Flat countersunk head with five locking ribs

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and HAMMER fixings.

• Designed to replace traditional masonry fixings
• TX30 TX Drive recess to reduce driver wear & prevent camming-out
• Serrated V-threads to achieve optimum insertion into all masonry types
• Zinc plated and yellow passivated for increased corrosion resistance
• High-Low thread on first 30mm to aid insertion and reduce torque
• Ideal for fitting windows and door frames
• Flat countersunk head with five locking ribs

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A fully threaded, grade 8.8 high tensile set screw used in a wide variety of applications. NOTE: Nuts not included.

• Plated in Trivalent Chromium (Cr3) Zinc
• Manufactured from grade 8.8 carbon steel

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and HAMMER fixings.

• Designed to replace traditional masonry fixings
• TX30 TX Drive recess to reduce driver wear & prevent camming-out
• Serrated V-threads to achieve optimum insertion into all masonry types
• Zinc plated and yellow passivated for increased corrosion resistance
• High-Low thread on first 30mm to aid insertion and reduce torque
• Ideal for fitting windows and door frames
• Flat countersunk head with five locking ribs

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and HAMMER fixings.

• Designed to replace traditional masonry fixings
• TX30 TX Drive recess to reduce driver wear & prevent camming-out
• Serrated V-threads to achieve optimum insertion into all masonry types
• Zinc plated and yellow passivated for increased corrosion resistance
• High-Low thread on first 30mm to aid insertion and reduce torque
• Ideal for fitting windows and door frames
• Flat countersunk head with five locking ribs

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A fully threaded, grade 8.8 high tensile set screw used in a wide variety of applications. NOTE: Nuts not included.

• Plated in Trivalent Chromium (Cr3) Zinc
• Manufactured from grade 8.8 carbon steel

Timco Timber Frame Construction & Landscaping Screws - Hex - Exterior - Green Organic - 6.7 x 75. Sold individually. Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray test, this screw is ideal for external applications.
Hex head countersunk with a fixed washer. Meets BS EN 9227:2012. Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion. Helix shank for removing debris and to improve clamping. 50° deep single thread to provide a secure fixing with high pull-out resistance. Single slash point to reduce torque and the risk of timber splitting at low edge distance. 25° sharp point and single lead for a fast start and improved thread acceptance.

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

The Concrete Frame Screw is a specially designed self-tapping masonry fixing in a Zinc Yellow Passivated finish with a T30 Bit included in the box. This screw is virtually stress free, allowing close to edge applications with the Torx compatible head screw for increased torque control. This screw has a high load capacity with an interlocking thread into the base material with through fixing which eliminates the need for marking and re-positioning. The Concrete Frame Screw is widely used for batten, window and door frame fixing and is also suitable for most masonry substrates including concrete and brickwork.

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

Timco Timber Frame Construction & Landscaping Screws - Wafer - Exterior - Green Organic - 6.7 x 75 - sold individually. Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Wafer head for improved clamping and a low profile finish with TX30 recess. Long lasting plating withstands up to 1,000 hours salt spray resistance in accordance to BS EN 9227:2012. Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion. Helix shank for removing debris and to improve clamping. 50° deep single thread to provide a secure fixing with high pull-out resistance. Single slash point to reduce torque and the risk of timber splitting at low edge distance. 25° sharp point and single lead for a fast start and improved thread acceptance

The Jet Speed Plug Plasterboard Fixing is a metal speed plug in a zinc alloy finish that has a specially designed cutting tip to pierce plasterboard skin. The countersink feature allows flush fitting to plasterboard and the new design flange on the screw head acts as a fixed washer which evenly distributes the load. This fixing is supplied with pozidrive compatible 4.5 x 35Mm round head screws and can be used when re-fixing into existing plug or anchor holes. The screw and fixture can be removed for cleaning and decoration while alternative screws can be used if required. This plug plasterboard fixing can be used in most types of hollow walls and plasterboard.

Spax wirox washer head screw ideal for timber constructions and constructing stairways.

Special features
Washer Head: Ensures higher pull through forces, allowing for larger screw distances.
Wirox A9J: Wirox surface has high protection against corrosion and is free from chromium-VI making it more environmentally friendly.
T-Star plus: Positive and secure fit of the BIT and better driving, e.g when working overhead.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood-dependent), its point effectively reduces the spliting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and HAMMER fixings.

• Designed to replace traditional masonry fixings
• TX30 TX Drive recess to reduce driver wear & prevent camming-out
• Serrated V-threads to achieve optimum insertion into all masonry types
• Zinc plated and yellow passivated for increased corrosion resistance
• High-Low thread on first 30mm to aid insertion and reduce torque
• Ideal for fitting windows and door frames
• Flat countersunk head with five locking ribs

The Concrete Frame Screw is a specially designed self-tapping masonry fixing in a Zinc Yellow Passivated finish with a T30 Bit included in the box. This screw is virtually stress free, allowing close to edge applications with the Torx compatible head screw for increased torque control. This screw has a high load capacity with an interlocking thread into the base material with through fixing which eliminates the need for marking and re-positioning. The Concrete Frame Screw is widely used for batten, window and door frame fixing and is also suitable for most masonry substrates including concrete and brickwork.

The Concrete Frame Screw is a specially designed self-tapping masonry fixing in a Zinc Yellow Passivated finish with a T30 Bit included in the box. This screw is virtually stress free, allowing close to edge applications with the Torx compatible head screw for increased torque control. This screw has a high load capacity with an interlocking thread into the base material with through fixing which eliminates the need for marking and re-positioning. The Concrete Frame Screw is widely used for batten, window and door frame fixing and is also suitable for most masonry substrates including concrete and brickwork.

The Concrete Frame Screw is a specially designed self-tapping masonry fixing in a Zinc Yellow Passivated finish with a T30 Bit included in the box. This screw is virtually stress free, allowing close to edge applications with the Torx compatible head screw for increased torque control. This screw has a high load capacity with an interlocking thread into the base material with through fixing which eliminates the need for marking and re-positioning. The Concrete Frame Screw is widely used for batten, window and door frame fixing and is also suitable for most masonry substrates including concrete and brickwork.

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

Timco Timber Frame Construction & Landscaping Screws - Wafer - Exterior - Green Organic - 6.7 x 95 - sold individually. Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Wafer head for improved clamping and a low profile finish with TX30 recess. Long lasting plating withstands up to 1,000 hours salt spray resistance in accordance to BS EN 9227:2012. Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion. Helix shank for removing debris and to improve clamping. 50° deep single thread to provide a secure fixing with high pull-out resistance. Single slash point to reduce torque and the risk of timber splitting at low edge distance. 25° sharp point and single lead for a fast start and improved thread acceptance

Timco Timber Frame Construction & Landscaping Screws - Hex - Exterior - Green Organic - 6.7 x 100. Sold individually. Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray test, this screw is ideal for external applications.
Hex head countersunk with a fixed washer. Meets BS EN 9227:2012. Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion. Helix shank for removing debris and to improve clamping. 50° deep single thread to provide a secure fixing with high pull-out resistance. Single slash point to reduce torque and the risk of timber splitting at low edge distance. 25° sharp point and single lead for a fast start and improved thread acceptance

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and HAMMER fixings.

• Designed to replace traditional masonry fixings
• TX30 TX Drive recess to reduce driver wear & prevent camming-out
• Serrated V-threads to achieve optimum insertion into all masonry types
• Zinc plated and yellow passivated for increased corrosion resistance
• High-Low thread on first 30mm to aid insertion and reduce torque
• Ideal for fitting windows and door frames
• Flat countersunk head with five locking ribs

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

Timco Timber Frame Construction & Landscaping Screws - Hex - Exterior - Green Organic - 6.7 x 125. Sold individually. Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray test, this screw is ideal for external applications.
Hex head countersunk with a fixed washer. Meets BS EN 9227:2012. Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion. Helix shank for removing debris and to improve clamping. 50° deep single thread to provide a secure fixing with high pull-out resistance. Single slash point to reduce torque and the risk of timber splitting at low edge distance. 25° sharp point and single lead for a fast start and improved thread acceptance.

Spax wirox washer head screw ideal for timber constructions and constructing stairways.

Special features
Washer Head: Ensures higher pull through forces, allowing for larger screw distances.
Wirox A9J: Wirox surface has high protection against corrosion and is free from chromium-VI making it more environmentally friendly.
T-Star plus: Positive and secure fit of the BIT and better driving, e.g when working overhead.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood-dependent), its point effectively reduces the spliting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

Timco Timber Frame Construction & Landscaping Screws - Wafer - Exterior - Green Organic - 6.7 x 125 - sold individually. Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Wafer head for improved clamping and a low profile finish with TX30 recess. Long lasting plating withstands up to 1,000 hours salt spray resistance in accordance to BS EN 9227:2012. Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion. Helix shank for removing debris and to improve clamping. 50° deep single thread to provide a secure fixing with high pull-out resistance. Single slash point to reduce torque and the risk of timber splitting at low edge distance. 25° sharp point and single lead for a fast start and improved thread acceptance

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and HAMMER fixings.

• Designed to replace traditional masonry fixings
• TX30 TX Drive recess to reduce driver wear & prevent camming-out
• Serrated V-threads to achieve optimum insertion into all masonry types
• Zinc plated and yellow passivated for increased corrosion resistance
• High-Low thread on first 30mm to aid insertion and reduce torque
• Ideal for fitting windows and door frames
• Flat countersunk head with five locking ribs

Timco Timber Frame Construction & Landscaping Screws - Hex - Exterior - Green Organic - 6.7 x 150. Sold individually. Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray test, this screw is ideal for external applications.
Hex head countersunk with a fixed washer. Meets BS EN 9227:2012. Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion. Helix shank for removing debris and to improve clamping. 50° deep single thread to provide a secure fixing with high pull-out resistance. Single slash point to reduce torque and the risk of timber splitting at low edge distance. 25° sharp point and single lead for a fast start and improved thread acceptance.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

Timco Timber Frame Construction & Landscaping Screws - Wafer - Exterior - Green Organic - 6.7 x 150 - sold individually. Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Wafer head for improved clamping and a low profile finish with TX30 recess. Long lasting plating withstands up to 1,000 hours salt spray resistance in accordance to BS EN 9227:2012. Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion. Helix shank for removing debris and to improve clamping. 50° deep single thread to provide a secure fixing with high pull-out resistance. Single slash point to reduce torque and the risk of timber splitting at low edge distance. 25° sharp point and single lead for a fast start and improved thread acceptance

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

Timco Timber Frame Construction & Landscaping Screws - Hex - Exterior - Green Organic - 6.7 x 200 Sold individually. Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Coated with a patented multi-layer corrosion resistant plating to withstand 1,000 hours salt spray test, this screw is ideal for external applications.
Hex head countersunk with a fixed washer. Meets BS EN 9227:2012. Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion. Helix shank for removing debris and to improve clamping. 50° deep single thread to provide a secure fixing with high pull-out resistance. Single slash point to reduce torque and the risk of timber splitting at low edge distance. 25° sharp point and single lead for a fast start and improved thread acceptance.

Spax wirox washer head screw ideal for timber constructions and constructing stairways.

Special features
Washer Head: Ensures higher pull through forces, allowing for larger screw distances.
Wirox A9J: Wirox surface has high protection against corrosion and is free from chromium-VI making it more environmentally friendly.
T-Star plus: Positive and secure fit of the BIT and better driving, e.g when working overhead.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood-dependent), its point effectively reduces the spliting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

Spax wirox washer head screw ideal for timber constructions and constructing stairways.

Special features
Washer Head: Ensures higher pull through forces, allowing for larger screw distances.
Wirox A9J: Wirox surface has high protection against corrosion and is free from chromium-VI making it more environmentally friendly.
T-Star plus: Positive and secure fit of the BIT and better driving, e.g when working overhead.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood-dependent), its point effectively reduces the spliting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.

Timco Timber Frame Construction & Landscaping Screws - Wafer - Exterior - Green Organic - 8 x 200 - sold individually. Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Wafer head for improved clamping and a low profile finish with TX30 recess. Long lasting plating withstands up to 1,000 hours salt spray resistance in accordance to BS EN 9227:2012. Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion. Helix shank for removing debris and to improve clamping. 50° deep single thread to provide a secure fixing with high pull-out resistance. Single slash point to reduce torque and the risk of timber splitting at low edge distance. 25° sharp point and single lead for a fast start and improved thread acceptance

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

The Dog Tooth Timber Connector Washer is a zinc plated, mild steel washer with teeth that bite into timber offering a non-movement fastener. These washers are mainly used in conjunction with carriage bolts where a strong timber to timber connection is required.

Spax wirox washer head screw ideal for timber constructions and constructing stairways.

Special features
Washer Head: Ensures higher pull through forces, allowing for larger screw distances.
Wirox A9J: Wirox surface has high protection against corrosion and is free from chromium-VI making it more environmentally friendly.
T-Star plus: Positive and secure fit of the BIT and better driving, e.g when working overhead.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood-dependent), its point effectively reduces the spliting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Spax wirox washer head screw ideal for timber constructions and constructing stairways.

Special features
Washer Head: Ensures higher pull through forces, allowing for larger screw distances.
Wirox A9J: Wirox surface has high protection against corrosion and is free from chromium-VI making it more environmentally friendly.
T-Star plus: Positive and secure fit of the BIT and better driving, e.g when working overhead.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood-dependent), its point effectively reduces the spliting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

For permanent fixing into plywood, hardboard, chipboard, fibreboard and other soft faced materials.

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

Spax wirox washer head screw ideal for timber constructions and constructing stairways.

Special features
Washer Head: Ensures higher pull through forces, allowing for larger screw distances.
Wirox A9J: Wirox surface has high protection against corrosion and is free from chromium-VI making it more environmentally friendly.
T-Star plus: Positive and secure fit of the BIT and better driving, e.g when working overhead.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood-dependent), its point effectively reduces the spliting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.

Spax wirox washer head screw ideal for timber constructions and constructing stairways.

Special features
Washer Head: Ensures higher pull through forces, allowing for larger screw distances.
Wirox A9J: Wirox surface has high protection against corrosion and is free from chromium-VI making it more environmentally friendly.
T-Star plus: Positive and secure fit of the BIT and better driving, e.g when working overhead.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood-dependent), its point effectively reduces the spliting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.
4CUT cutter: Starting at screw lengths of 160mm, the special moulding at the thread run out of partial thread screws significantly reduces the screwing-in torque.

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power. NOTE: Sharp point only.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power. NOTE: Sharp point only.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

For permanent fixing into plywood, hardboard, chipboard, fibreboard and other soft faced materials.

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Spax wirox washer head screw ideal for timber constructions and constructing stairways.

Special features
Washer Head: Ensures higher pull through forces, allowing for larger screw distances.
Wirox A9J: Wirox surface has high protection against corrosion and is free from chromium-VI making it more environmentally friendly.
T-Star plus: Positive and secure fit of the BIT and better driving, e.g when working overhead.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood-dependent), its point effectively reduces the spliting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power. NOTE: Sharp point only.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power. NOTE: Sharp point only.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Spax wirox washer head screw ideal for timber constructions and constructing stairways.

Special features
Washer Head: Ensures higher pull through forces, allowing for larger screw distances.
Wirox A9J: Wirox surface has high protection against corrosion and is free from chromium-VI making it more environmentally friendly.
T-Star plus: Positive and secure fit of the BIT and better driving, e.g when working overhead.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood-dependent), its point effectively reduces the spliting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.
4CUT cutter: Starting at screw lengths of 160mm, the special moulding at the thread run out of partial thread screws significantly reduces the screwing-in torque.

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power. NOTE: Sharp point only.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Used to secure plasterboard to timber stud work.

• Phillips No.2 recess for a positive drive
• Bugle head to reduce likelihood of damaging the board surface
• 25° super sharp point for ease of penetration
• Coarse thread for extreme hold

Spax wirox washer head screw ideal for timber constructions and constructing stairways.

Special features
Washer Head: Ensures higher pull through forces, allowing for larger screw distances.
Wirox A9J: Wirox surface has high protection against corrosion and is free from chromium-VI making it more environmentally friendly.
T-Star plus: Positive and secure fit of the BIT and better driving, e.g when working overhead.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood-dependent), its point effectively reduces the spliting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

A single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

4mm x 15mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

Suitable for all kinds of concrete and masonry substrate materials. Ideal for medium and lightweight applications.

Suitable for all kinds of concrete and masonry substrate materials. Ideal for medium and lightweight applications.

Spax wirox washer head screw ideal for timber constructions and constructing stairways.

Special features
Washer Head: Ensures higher pull through forces, allowing for larger screw distances.
Wirox A9J: Wirox surface has high protection against corrosion and is free from chromium-VI making it more environmentally friendly.
T-Star plus: Positive and secure fit of the BIT and better driving, e.g when working overhead.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood-dependent), its point effectively reduces the spliting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.
4CUT cutter: Starting at screw lengths of 160mm, the special moulding at the thread run out of partial thread screws significantly reduces the screwing-in torque.

For permanent fixing into plywood, hardboard, chipboard, fibreboard and other soft faced materials.

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power. NOTE: Sharp point only.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

4mm x 20mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length