Screws

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

The Concrete Frame Screw is a specially designed self-tapping masonry fixing in a Zinc Yellow Passivated finish with a T30 Bit included in the box. This screw is virtually stress free, allowing close to edge applications with the Torx compatible head screw for increased torque control. This screw has a high load capacity with an interlocking thread into the base material with through fixing which eliminates the need for marking and re-positioning. The Concrete Frame Screw is widely used for batten, window and door frame fixing and is also suitable for most masonry substrates including concrete and brickwork.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

6mm x 90mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

6mm x 80mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

6mm x 40mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

5mm x 35mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

5mm x 25mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

4.5mm x 50mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

4.5mm x 40mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

4.5mm x 35mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

4.5mm x 25mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

4.5mm x 25mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

4mm x 45mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

4mm x 35mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

4mm x 20mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

4mm x 15mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

3mm x 15mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Pozi Countersunk Screws are single thread multi-purpose woodscrews that are ideal for a range of fixing applications, particularly suited to marine, coastal and sanitary ware applications. In a stainless steel finish.

The Pozi Countersunk Screws are single thread multi-purpose woodscrews that are ideal for a range of fixing applications, particularly suited to marine, coastal and sanitary ware applications. In a stainless steel finish.

The Pozi Countersunk Screws are single thread multi-purpose woodscrews that are ideal for a range of fixing applications, particularly suited to marine, coastal and sanitary ware applications. In a stainless steel finish.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Dog Tooth Timber Connector Washer is a zinc plated, mild steel washer with teeth that bite into timber offering a non-movement fastener. These washers are mainly used in conjunction with carriage bolts where a strong timber to timber connection is required.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

Box of 200 M3 X 25mm black drywall screws. Coarse thread specialist screw with countersunk Phillips head. Screws are made from fully hardened C1022 steel and black phosphate finish. Uses include drywall applications, fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. Extra deep insert bit recess offering a firmer positive drive. Extremely sharp piercing point. Thread gives speedy insertion and improved holding power. Bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking, and minimises damage to the surface enabling a smoother surface finish.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These screws are predominantly used when fitting plasterboard to timber stud work.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These screws are predominantly used when fitting plasterboard to timber stud work.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These screws are predominantly used when fitting plasterboard to timber stud work.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

The Pozi Countersunk Screws are single thread multi-purpose woodscrews that are ideal for a range of fixing applications, particularly suited to marine, coastal and sanitary ware applications. In a stainless steel finish.

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and HAMMER fixings.

• Designed to replace traditional masonry fixings
• TX30 TX Drive recess to reduce driver wear & prevent camming-out
• Serrated V-threads to achieve optimum insertion into all masonry types
• Zinc plated and yellow passivated for increased corrosion resistance
• High-Low thread on first 30mm to aid insertion and reduce torque
• Ideal for fitting windows and door frames
• Flat countersunk head with five locking ribs

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and HAMMER fixings.

• Designed to replace traditional masonry fixings
• TX30 TX Drive recess to reduce driver wear & prevent camming-out
• Serrated V-threads to achieve optimum insertion into all masonry types
• Zinc plated and yellow passivated for increased corrosion resistance
• High-Low thread on first 30mm to aid insertion and reduce torque
• Ideal for fitting windows and door frames
• Flat countersunk head with five locking ribs

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and HAMMER fixings.

• Designed to replace traditional masonry fixings
• TX30 TX Drive recess to reduce driver wear & prevent camming-out
• Serrated V-threads to achieve optimum insertion into all masonry types
• Zinc plated and yellow passivated for increased corrosion resistance
• High-Low thread on first 30mm to aid insertion and reduce torque
• Ideal for fitting windows and door frames
• Flat countersunk head with five locking ribs

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and HAMMER fixings.

• Designed to replace traditional masonry fixings
• TX30 TX Drive recess to reduce driver wear & prevent camming-out
• Serrated V-threads to achieve optimum insertion into all masonry types
• Zinc plated and yellow passivated for increased corrosion resistance
• High-Low thread on first 30mm to aid insertion and reduce torque
• Ideal for fitting windows and door frames
• Flat countersunk head with five locking ribs

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and HAMMER fixings.

• Designed to replace traditional masonry fixings
• TX30 TX Drive recess to reduce driver wear & prevent camming-out
• Serrated V-threads to achieve optimum insertion into all masonry types
• Zinc plated and yellow passivated for increased corrosion resistance
• High-Low thread on first 30mm to aid insertion and reduce torque
• Ideal for fitting windows and door frames
• Flat countersunk head with five locking ribs

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and HAMMER fixings.

• Designed to replace traditional masonry fixings
• TX30 TX Drive recess to reduce driver wear & prevent camming-out
• Serrated V-threads to achieve optimum insertion into all masonry types
• Zinc plated and yellow passivated for increased corrosion resistance
• High-Low thread on first 30mm to aid insertion and reduce torque
• Ideal for fitting windows and door frames
• Flat countersunk head with five locking ribs

For permanent fixing into plywood, hardboard, chipboard, fibreboard and other soft faced materials.

For permanent fixing into plywood, hardboard, chipboard, fibreboard and other soft faced materials.

For permanent fixing into plywood, hardboard, chipboard, fibreboard and other soft faced materials.

Used when fixing roofing and cladding sheets to timber purlins.

• For medium duty rust protection
• Conforms to Eurocode 5 and service class 2

Used when fixing roofing and cladding sheets to timber purlins.

• For medium duty rust protection
• Conforms to Eurocode 5 and service class 2

Used when fixing roofing and cladding sheets to timber purlins.

• For medium duty rust protection
• Conforms to Eurocode 5 and service class 2

Used when fixing roofing and cladding sheets to timber purlins.

• For medium duty rust protection
• Conforms to Eurocode 5 and service class 2

Used when fixing roofing and cladding sheets to timber purlins.

• For medium duty rust protection
• Conforms to Eurocode 5 and service class 2

Timco Timber Frame Construction & Landscaping Screws - Wafer - Exterior - Green Organic - 8 x 200 - sold individually. Designed as an alternative to the traditional coach screw mainly used for timber to timber applications. Wafer head for improved clamping and a low profile finish with TX30 recess. Long lasting plating withstands up to 1,000 hours salt spray resistance in accordance to BS EN 9227:2012. Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion. Helix shank for removing debris and to improve clamping. 50° deep single thread to provide a secure fixing with high pull-out resistance. Single slash point to reduce torque and the risk of timber splitting at low edge distance. 25° sharp point and single lead for a fast start and improved thread acceptance