Screws

The Reisser Cutter yellow Screw benefits from having a unique design with 2 slots cut into the thread on 30mm and above screws (1 cut up to 25mm). This allows the screw to work closer to the edge of both timber and board materials without splitting. Includes 1 x Wera Bi-Torsion Pozi Bits

• Single, wide, deep, lubricated thread for lower driving resistance and fast Distinct ribs & tucks: Self countersinking that means there is no need to counterbore.
• Re-inforced Collar: This prevents snapping and gives depth which reduced the risk of ’’cam-out''.
• Lubricated, sharp, wide, deep thread: 40% reduction in driving resistance.
• Yellow tropicalized: A superior rust resistance screw.

The Reisser Cutter yellow Screw benefits from having a unique design with 2 slots cut into the thread on 30mm and above screws (1 cut up to 25mm). This allows the screw to work closer to the edge of both timber and board materials without splitting. Includes 1 x Wera Bi-Torsion Pozi Bits

• Single, wide, deep, lubricated thread for lower driving resistance and fast Distinct ribs & tucks: Self countersinking that means there is no need to counterbore.
• Re-inforced Collar: This prevents snapping and gives depth which reduced the risk of ’’cam-out''.
• Lubricated, sharp, wide, deep thread: 40% reduction in driving resistance.
• Yellow tropicalized: A superior rust resistance screw.

The Reisser Cutter yellow Screw benefits from having a unique design with 2 slots cut into the thread on 30mm and above screws (1 cut up to 25mm). This allows the screw to work closer to the edge of both timber and board materials without splitting. Includes 1 x Wera Bi-Torsion Pozi Bits

• Single, wide, deep, lubricated thread for lower driving resistance and fast Distinct ribs & tucks: Self countersinking that means there is no need to counterbore.
• Re-inforced Collar: This prevents snapping and gives depth which reduced the risk of ’’cam-out''.
• Lubricated, sharp, wide, deep thread: 40% reduction in driving resistance.
• Yellow tropicalized: A superior rust resistance screw.

The Reisser Cutter yellow Screw benefits from having a unique design with 2 slots cut into the thread on 30mm and above screws (1 cut up to 25mm). This allows the screw to work closer to the edge of both timber and board materials without splitting. Includes 1 x Wera Bi-Torsion Pozi Bits

• Single, wide, deep, lubricated thread for lower driving resistance and fast Distinct ribs & tucks: Self countersinking that means there is no need to counterbore.
• Re-inforced Collar: This prevents snapping and gives depth which reduced the risk of ’’cam-out''.
• Lubricated, sharp, wide, deep thread: 40% reduction in driving resistance.
• Yellow tropicalized: A superior rust resistance screw.

The Reisser Cutter yellow Screw benefits from having a unique design with 2 slots cut into the thread on 30mm and above screws (1 cut up to 25mm). This allows the screw to work closer to the edge of both timber and board materials without splitting. Includes 1 x Wera Bi-Torsion Pozi Bits

• Single, wide, deep, lubricated thread for lower driving resistance and fast Distinct ribs & tucks: Self countersinking that means there is no need to counterbore.
• Re-inforced Collar: This prevents snapping and gives depth which reduced the risk of ’’cam-out''.
• Lubricated, sharp, wide, deep thread: 40% reduction in driving resistance.
• Yellow tropicalized: A superior rust resistance screw.

The Reisser Trade Pack offers a range of assorted packs of screws ideally suited to projects that require a variety of different length screws. The trade pack offers slightly more variety of sizes of screws than the trial pack, perfect for DIY or the occasional tradesmen.

• 4.0 x 25mm – 200pcs
• 4.0 x 30mm – 200pcs
• 4.0 x 40mm – 200pcs
• 4.0 x 50mm – 200pcs
• 5.0 x 40mm – 200pcs
• 5.0 x 50mm – 200pcs
• 5.0 x 60mm – 200pcs
• 5.0 x 80mm – 200pcs
• PLUS PZ2 x 25mm Reisser Torsion Bits – 20pcs

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Box of 200 M3 X 25mm black drywall screws. Coarse thread specialist screw with countersunk Phillips head. Screws are made from fully hardened C1022 steel and black phosphate finish. Uses include drywall applications, fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. Extra deep insert bit recess offering a firmer positive drive. Extremely sharp piercing point. Thread gives speedy insertion and improved holding power. Bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking, and minimises damage to the surface enabling a smoother surface finish.

The Jet Speed Plug Plasterboard Fixing is a metal speed plug in a zinc alloy finish that has a specially designed cutting tip to pierce plasterboard skin. The countersink feature allows flush fitting to plasterboard and the new design flange on the screw head acts as a fixed washer which evenly distributes the load. This fixing is supplied with pozidrive compatible 4.5 x 35Mm round head screws and can be used when re-fixing into existing plug or anchor holes. The screw and fixture can be removed for cleaning and decoration while alternative screws can be used if required. This plug plasterboard fixing can be used in most types of hollow walls and plasterboard.

The Dog Tooth Timber Connector Washer is a zinc plated, mild steel washer with teeth that bite into timber offering a non-movement fastener. These washers are mainly used in conjunction with carriage bolts where a strong timber to timber connection is required.

The Decking Screw is a coarse single thread screw developed specifically for fixing decking and is hardened and specialist Green treated and compatible with a countersunk pozi. This screw is designed for decking but also ideal for other exterior timber and fencing uses and the Pozidrive compatible head enables higher torque levels with a reduced risk of cam out while the extremely coarse thread provides increased holding power in all types of decking timber. This screw is specifically designed to accommodate wood’s natural tendency to expand and contract and is hardened and green treated for maximum durability in the face of the elements.

The Decking Screw is a coarse single thread screw developed specifically for fixing decking and is hardened and specialist Green treated and compatible with a countersunk pozi. This screw is designed for decking but also ideal for other exterior timber and fencing uses and the Pozidrive compatible head enables higher torque levels with a reduced risk of cam out while the extremely coarse thread provides increased holding power in all types of decking timber. This screw is specifically designed to accommodate wood’s natural tendency to expand and contract and is hardened and green treated for maximum durability in the face of the elements.

The Decking Screw is a coarse single thread screw developed specifically for fixing decking and is hardened and specialist Green treated and compatible with a countersunk pozi. This screw is designed for decking but also ideal for other exterior timber and fencing uses and the Pozidrive compatible head enables higher torque levels with a reduced risk of cam out while the extremely coarse thread provides increased holding power in all types of decking timber. This screw is specifically designed to accommodate wood’s natural tendency to expand and contract and is hardened and green treated for maximum durability in the face of the elements.

The Decking Screw is a coarse single thread screw developed specifically for fixing decking and is hardened and specialist Green treated and compatible with a countersunk pozi. This screw is designed for decking but also ideal for other exterior timber and fencing uses and the Pozidrive compatible head enables higher torque levels with a reduced risk of cam out while the extremely coarse thread provides increased holding power in all types of decking timber. This screw is specifically designed to accommodate wood’s natural tendency to expand and contract and is hardened and green treated for maximum durability in the face of the elements.

The Decking Screw is a coarse single thread screw developed specifically for fixing decking and is hardened and specialist Green treated and compatible with a countersunk pozi. This screw is designed for decking but also ideal for other exterior timber and fencing uses and the Pozidrive compatible head enables higher torque levels with a reduced risk of cam out while the extremely coarse thread provides increased holding power in all types of decking timber. This screw is specifically designed to accommodate wood’s natural tendency to expand and contract and is hardened and green treated for maximum durability in the face of the elements.

The Decking Screw is a coarse single thread screw developed specifically for fixing decking and is hardened and specialist Green treated and compatible with a countersunk pozi. This screw is designed for decking but also ideal for other exterior timber and fencing uses and the Pozidrive compatible head enables higher torque levels with a reduced risk of cam out while the extremely coarse thread provides increased holding power in all types of decking timber. This screw is specifically designed to accommodate wood’s natural tendency to expand and contract and is hardened and green treated for maximum durability in the face of the elements.

The Decking Screw is a coarse single thread screw developed specifically for fixing decking and is hardened and specialist Green treated and compatible with a countersunk pozi. This screw is designed for decking but also ideal for other exterior timber and fencing uses and the Pozidrive compatible head enables higher torque levels with a reduced risk of cam out while the extremely coarse thread provides increased holding power in all types of decking timber. This screw is specifically designed to accommodate wood’s natural tendency to expand and contract and is hardened and green treated for maximum durability in the face of the elements.

The Decking Screw is a coarse single thread screw developed specifically for fixing decking and is hardened and specialist Green treated and compatible with a countersunk pozi. This screw is designed for decking but also ideal for other exterior timber and fencing uses and the Pozidrive compatible head enables higher torque levels with a reduced risk of cam out while the extremely coarse thread provides increased holding power in all types of decking timber. This screw is specifically designed to accommodate wood’s natural tendency to expand and contract and is hardened and green treated for maximum durability in the face of the elements.

The Concrete Frame Screw is a specially designed self-tapping masonry fixing in a Zinc Yellow Passivated finish with a T30 Bit included in the box. This screw is virtually stress free, allowing close to edge applications with the Torx compatible head screw for increased torque control. This screw has a high load capacity with an interlocking thread into the base material with through fixing which eliminates the need for marking and re-positioning. The Concrete Frame Screw is widely used for batten, window and door frame fixing and is also suitable for most masonry substrates including concrete and brickwork.

The Concrete Frame Screw is a specially designed self-tapping masonry fixing in a Zinc Yellow Passivated finish with a T30 Bit included in the box. This screw is virtually stress free, allowing close to edge applications with the Torx compatible head screw for increased torque control. This screw has a high load capacity with an interlocking thread into the base material with through fixing which eliminates the need for marking and re-positioning. The Concrete Frame Screw is widely used for batten, window and door frame fixing and is also suitable for most masonry substrates including concrete and brickwork.

The Concrete Frame Screw is a specially designed self-tapping masonry fixing in a Zinc Yellow Passivated finish with a T30 Bit included in the box. This screw is virtually stress free, allowing close to edge applications with the Torx compatible head screw for increased torque control. This screw has a high load capacity with an interlocking thread into the base material with through fixing which eliminates the need for marking and re-positioning. The Concrete Frame Screw is widely used for batten, window and door frame fixing and is also suitable for most masonry substrates including concrete and brickwork.

The Concrete Frame Screw is a specially designed self-tapping masonry fixing in a Zinc Yellow Passivated finish with a T30 Bit included in the box. This screw is virtually stress free, allowing close to edge applications with the Torx compatible head screw for increased torque control. This screw has a high load capacity with an interlocking thread into the base material with through fixing which eliminates the need for marking and re-positioning. The Concrete Frame Screw is widely used for batten, window and door frame fixing and is also suitable for most masonry substrates including concrete and brickwork.

The Collated Drywall Screw is a coarse thread specialist screw with a countersunk Phillips Drive bugle head in a black phosphate finish. The screw also features a flexible plastic collated strip designed specifically for use with mechanical screw fastening machines. The screw is suitable for use with most makes of collated drywall guns.

The Collated Drywall Screw is a coarse thread specialist screw with a countersunk Phillips Drive bugle head in a black phosphate finish. The screw also features a flexible plastic collated strip designed specifically for use with mechanical screw fastening machines. The screw is suitable for use with most makes of collated drywall guns.

The Collated Drywall Screw is a coarse thread specialist screw with a countersunk Phillips Drive bugle head in a black phosphate finish. The screw also features a flexible plastic collated strip designed specifically for use with mechanical screw fastening machines. The screw is suitable for use with most makes of collated drywall guns.

The Collated Drywall Screw is a coarse thread specialist screw with a countersunk Phillips Drive bugle head in a black phosphate finish. The screw also features a flexible plastic collated strip designed specifically for use with mechanical screw fastening machines. The screw is suitable for use with most makes of collated drywall guns.

The Collated Drywall Screw is a coarse thread specialist screw with a countersunk Phillips Drive bugle head in a black phosphate finish. The screw also features a flexible plastic collated strip designed specifically for use with mechanical screw fastening machines. The screw is suitable for use with most makes of collated drywall guns.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

6mm x 90mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

6mm x 80mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

6mm x 40mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

5mm x 35mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

4.5mm x 35mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

4.5mm x 25mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.