Screws

3mm x 15mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

4mm x 15mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

4mm x 20mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

4mm x 35mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

4mm x 45mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

4.5mm x 25mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

4.5mm x 40mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

4.5mm x 50mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

5mm x 25mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

For permanent fixing into plywood, hardboard, chipboard, fibreboard and other soft faced materials.

For permanent fixing into plywood, hardboard, chipboard, fibreboard and other soft faced materials.

For permanent fixing into plywood, hardboard, chipboard, fibreboard and other soft faced materials.

The Timber Fixing Screws are professional, high performance timber screws for fixing into softwood or hardwood with a combination hexagonal head with deep Torx compatible insert that ensures reduced cam-out. The super sharp tip gives an immediate bite from the first turn and the patented self-drilling thread removes the need to-pre-drill timber and reduces the probability of splitting. The hardened case and core give exceptional strength and are protected by Elementech 2000 surface treatment which provides corrosion resistance up to twice as long as standard timber screws. These screws have an impressive pull out value meaning there is less risk of working loose in substrates that flex in use and these screws are able to flex to 35º reducing likelihood of screw shearing while being CE approved for use in load-bearing timber construction.

The Timber Fixing Screws are professional, high performance timber screws for fixing into softwood or hardwood with a combination hexagonal head with deep Torx compatible insert that ensures reduced cam-out. The super sharp tip gives an immediate bite from the first turn and the patented self-drilling thread removes the need to-pre-drill timber and reduces the probability of splitting. The hardened case and core give exceptional strength and are protected by Elementech 2000 surface treatment which provides corrosion resistance up to twice as long as standard timber screws. These screws have an impressive pull out value meaning there is less risk of working loose in substrates that flex in use and these screws are able to flex to 35º reducing likelihood of screw shearing while being CE approved for use in load-bearing timber construction.

The Timber Fixing Screws are professional, high performance timber screws for fixing into softwood or hardwood with a combination hexagonal head with deep Torx compatible insert that ensures reduced cam-out. The super sharp tip gives an immediate bite from the first turn and the patented self-drilling thread removes the need to-pre-drill timber and reduces the probability of splitting. The hardened case and core give exceptional strength and are protected by Elementech 2000 surface treatment which provides corrosion resistance up to twice as long as standard timber screws. These screws have an impressive pull out value meaning there is less risk of working loose in substrates that flex in use and these screws are able to flex to 35º reducing likelihood of screw shearing while being CE approved for use in load-bearing timber construction.

The Timber Fixing Screws are professional, high performance timber screws for fixing into softwood or hardwood with a combination hexagonal head with deep Torx compatible insert that ensures reduced cam-out. The super sharp tip gives an immediate bite from the first turn and the patented self-drilling thread removes the need to-pre-drill timber and reduces the probability of splitting. The hardened case and core give exceptional strength and are protected by Elementech 2000 surface treatment which provides corrosion resistance up to twice as long as standard timber screws. These screws have an impressive pull out value meaning there is less risk of working loose in substrates that flex in use and these screws are able to flex to 35º reducing likelihood of screw shearing while being CE approved for use in load-bearing timber construction.

The Pozi Countersunk Screws are single thread multi-purpose woodscrews that are ideal for a range of fixing applications, particularly suited to marine, coastal and sanitary ware applications. In a stainless steel finish.

The Pozi Countersunk Screws are single thread multi-purpose woodscrews that are ideal for a range of fixing applications, particularly suited to marine, coastal and sanitary ware applications. In a stainless steel finish.

The Pozi Countersunk Screws are single thread multi-purpose woodscrews that are ideal for a range of fixing applications, particularly suited to marine, coastal and sanitary ware applications. In a stainless steel finish.

The Pozi Countersunk Screws are single thread multi-purpose woodscrews that are ideal for a range of fixing applications, particularly suited to marine, coastal and sanitary ware applications. In a stainless steel finish.

The Pozi Countersunk Screws are single thread multi-purpose woodscrews that are ideal for a range of fixing applications, particularly suited to marine, coastal and sanitary ware applications. In a stainless steel finish.

The Pozi Countersunk Screws are single thread multi-purpose woodscrews that are ideal for a range of fixing applications, particularly suited to marine, coastal and sanitary ware applications. In a stainless steel finish.

The Pozi Countersunk Screws are single thread multi-purpose woodscrews that are ideal for a range of fixing applications, particularly suited to marine, coastal and sanitary ware applications. In a stainless steel finish.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These screws are predominantly used when fitting plasterboard to timber stud work.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These screws are predominantly used when fitting plasterboard to timber stud work.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These screws are predominantly used when fitting plasterboard to timber stud work.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

The Black Drywall Screws are a coarse thread specialist screw with a countersunk Phillips drive Bugle head in a black phosphate finish. These screws are used for fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. The screws are made from fully hardened C1022 steel and have an extra deep insert bit recess that offers a firmer positive drive and an extremely sharp piercing point. The thread gives speedy insertion and improved holding power while the bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking and also minimises damage to the surface enabling a smoother surface finish. These Screws are predominantly used when fitting plasterboard to timber stud work.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

4.5mm x 25mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

4.5mm x 35mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

5mm x 35mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

6mm x 40mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Chipboard Countersunk Screws are single thread multi-purpose woodscrews in a Zinc yellow passivated finish with a countersunk pozidrive compatible recessed head. These are highly versatile and immensely popular single thread screws and are perfect for a whole host of fixing needs. These screws are ideal for fixing into a range of substrates including softwoods, hardwoods, chipboards and fibreboards and have a quicker and easier insertion thanks to an extra deep insert bit recess, which enables a firmer positive drive. The single thread and special wax coating increases speed and ease of insertion and the single thread design also provides increased holding power particularly when used with particle boards like MDF. These screws offer more corrosion resistance than zinc plated products thanks to additional passivation process and are suitable for numerous ironmongery, joinery, electrical and plumbing applications.

6mm x 80mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

6mm x 90mm ZYP chipboard csk screws in a pack of 200. Single thread multi-purpose woodscrews with countersunk pozidrive compatible recessed head and zinc yellow passivated finish. Highly versatile and perfect for a whole host of fixing needs, including fixing softwoods, hardwoods, chipboards and fibreboards. Quicker and easier insertion possible thanks to an extra deep insert bit recess, which enables a firmer positive drive. Single thread and special wax coating also increases speed and ease of insertion. Single thread design provides increased holding power particularly when used with particle boards like MDF. Passivated surface offers more corrosion resistance than zinc plated products. Suitable for numerous ironmongery, joinery, electrical and plumbing applications.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Coach Screw is a single thread screw with a hexagonal head in a zinc plated finish. These screws are used predominantly when fixing to timber in many fencing and joinery applications and are heavy duty fixings. This screw features a traditional hexagon head suitable for use with socket drivers and is widely used in conjunction with nylon wall plugs in particular, the satellite industry. Conforms to DIN571 standards.

The Collated Drywall Screw is a coarse thread specialist screw with a countersunk Phillips Drive bugle head in a black phosphate finish. The screw also features a flexible plastic collated strip designed specifically for use with mechanical screw fastening machines. The screw is suitable for use with most makes of collated drywall guns.

The Collated Drywall Screw is a coarse thread specialist screw with a countersunk Phillips Drive bugle head in a black phosphate finish. The screw also features a flexible plastic collated strip designed specifically for use with mechanical screw fastening machines. The screw is suitable for use with most makes of collated drywall guns.

The Collated Drywall Screw is a coarse thread specialist screw with a countersunk Phillips Drive bugle head in a black phosphate finish. The screw also features a flexible plastic collated strip designed specifically for use with mechanical screw fastening machines. The screw is suitable for use with most makes of collated drywall guns.

The Collated Drywall Screw is a coarse thread specialist screw with a countersunk Phillips Drive bugle head in a black phosphate finish. The screw also features a flexible plastic collated strip designed specifically for use with mechanical screw fastening machines. The screw is suitable for use with most makes of collated drywall guns.

The Collated Drywall Screw is a coarse thread specialist screw with a countersunk Phillips Drive bugle head in a black phosphate finish. The screw also features a flexible plastic collated strip designed specifically for use with mechanical screw fastening machines. The screw is suitable for use with most makes of collated drywall guns.

The Concrete Frame Screw is a specially designed self-tapping masonry fixing in a Zinc Yellow Passivated finish with a T30 Bit included in the box. This screw is virtually stress free, allowing close to edge applications with the Torx compatible head screw for increased torque control. This screw has a high load capacity with an interlocking thread into the base material with through fixing which eliminates the need for marking and re-positioning. The Concrete Frame Screw is widely used for batten, window and door frame fixing and is also suitable for most masonry substrates including concrete and brickwork.

The Concrete Frame Screw is a specially designed self-tapping masonry fixing in a Zinc Yellow Passivated finish with a T30 Bit included in the box. This screw is virtually stress free, allowing close to edge applications with the Torx compatible head screw for increased torque control. This screw has a high load capacity with an interlocking thread into the base material with through fixing which eliminates the need for marking and re-positioning. The Concrete Frame Screw is widely used for batten, window and door frame fixing and is also suitable for most masonry substrates including concrete and brickwork.

The Concrete Frame Screw is a specially designed self-tapping masonry fixing in a Zinc Yellow Passivated finish with a T30 Bit included in the box. This screw is virtually stress free, allowing close to edge applications with the Torx compatible head screw for increased torque control. This screw has a high load capacity with an interlocking thread into the base material with through fixing which eliminates the need for marking and re-positioning. The Concrete Frame Screw is widely used for batten, window and door frame fixing and is also suitable for most masonry substrates including concrete and brickwork.

The Concrete Frame Screw is a specially designed self-tapping masonry fixing in a Zinc Yellow Passivated finish with a T30 Bit included in the box. This screw is virtually stress free, allowing close to edge applications with the Torx compatible head screw for increased torque control. This screw has a high load capacity with an interlocking thread into the base material with through fixing which eliminates the need for marking and re-positioning. The Concrete Frame Screw is widely used for batten, window and door frame fixing and is also suitable for most masonry substrates including concrete and brickwork.

The Decking Screw is a coarse single thread screw developed specifically for fixing decking and is hardened and specialist Green treated and compatible with a countersunk pozi. This screw is designed for decking but also ideal for other exterior timber and fencing uses and the Pozidrive compatible head enables higher torque levels with a reduced risk of cam out while the extremely coarse thread provides increased holding power in all types of decking timber. This screw is specifically designed to accommodate wood’s natural tendency to expand and contract and is hardened and green treated for maximum durability in the face of the elements.

The Decking Screw is a coarse single thread screw developed specifically for fixing decking and is hardened and specialist Green treated and compatible with a countersunk pozi. This screw is designed for decking but also ideal for other exterior timber and fencing uses and the Pozidrive compatible head enables higher torque levels with a reduced risk of cam out while the extremely coarse thread provides increased holding power in all types of decking timber. This screw is specifically designed to accommodate wood’s natural tendency to expand and contract and is hardened and green treated for maximum durability in the face of the elements.

The Decking Screw is a coarse single thread screw developed specifically for fixing decking and is hardened and specialist Green treated and compatible with a countersunk pozi. This screw is designed for decking but also ideal for other exterior timber and fencing uses and the Pozidrive compatible head enables higher torque levels with a reduced risk of cam out while the extremely coarse thread provides increased holding power in all types of decking timber. This screw is specifically designed to accommodate wood’s natural tendency to expand and contract and is hardened and green treated for maximum durability in the face of the elements.

The Decking Screw is a coarse single thread screw developed specifically for fixing decking and is hardened and specialist Green treated and compatible with a countersunk pozi. This screw is designed for decking but also ideal for other exterior timber and fencing uses and the Pozidrive compatible head enables higher torque levels with a reduced risk of cam out while the extremely coarse thread provides increased holding power in all types of decking timber. This screw is specifically designed to accommodate wood’s natural tendency to expand and contract and is hardened and green treated for maximum durability in the face of the elements.

The Decking Screw is a coarse single thread screw developed specifically for fixing decking and is hardened and specialist Green treated and compatible with a countersunk pozi. This screw is designed for decking but also ideal for other exterior timber and fencing uses and the Pozidrive compatible head enables higher torque levels with a reduced risk of cam out while the extremely coarse thread provides increased holding power in all types of decking timber. This screw is specifically designed to accommodate wood’s natural tendency to expand and contract and is hardened and green treated for maximum durability in the face of the elements.

The Decking Screw is a coarse single thread screw developed specifically for fixing decking and is hardened and specialist Green treated and compatible with a countersunk pozi. This screw is designed for decking but also ideal for other exterior timber and fencing uses and the Pozidrive compatible head enables higher torque levels with a reduced risk of cam out while the extremely coarse thread provides increased holding power in all types of decking timber. This screw is specifically designed to accommodate wood’s natural tendency to expand and contract and is hardened and green treated for maximum durability in the face of the elements.

The Decking Screw is a coarse single thread screw developed specifically for fixing decking and is hardened and specialist Green treated and compatible with a countersunk pozi. This screw is designed for decking but also ideal for other exterior timber and fencing uses and the Pozidrive compatible head enables higher torque levels with a reduced risk of cam out while the extremely coarse thread provides increased holding power in all types of decking timber. This screw is specifically designed to accommodate wood’s natural tendency to expand and contract and is hardened and green treated for maximum durability in the face of the elements.

The Decking Screw is a coarse single thread screw developed specifically for fixing decking and is hardened and specialist Green treated and compatible with a countersunk pozi. This screw is designed for decking but also ideal for other exterior timber and fencing uses and the Pozidrive compatible head enables higher torque levels with a reduced risk of cam out while the extremely coarse thread provides increased holding power in all types of decking timber. This screw is specifically designed to accommodate wood’s natural tendency to expand and contract and is hardened and green treated for maximum durability in the face of the elements.

The Dog Tooth Timber Connector Washer is a zinc plated, mild steel washer with teeth that bite into timber offering a non-movement fastener. These washers are mainly used in conjunction with carriage bolts where a strong timber to timber connection is required.

Box of 200 M3 X 25mm black drywall screws. Coarse thread specialist screw with countersunk Phillips head. Screws are made from fully hardened C1022 steel and black phosphate finish. Uses include drywall applications, fitting plasterboard, fibreboard and other types of insulation boards to wood or steel studding. Extra deep insert bit recess offering a firmer positive drive. Extremely sharp piercing point. Thread gives speedy insertion and improved holding power. Bugle head allows the screw to sink effortlessly into the dry lining without the need for countersinking, and minimises damage to the surface enabling a smoother surface finish.

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

Reisser Cutter Wood screws represent the latest generation of technological excellence. They are uniquely designed to give ultimate performance and a perfect finish in all wood applications. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique Reisser lubrication gives up to 40% less driving resistance and easy penetration.

• Thread Form: Full Thread
• Yellow tropicalised finish - Superior rust resistance compared to a standard BZP screw
• Reinforced collar prevents snapping and gives depth for a wide, deep Pozi to be inserted, therefore reducing the risk of 'cam-out'
• Ribs and tucks perform a self countersink operation
• Two patented slots prevent splitting close to the edge, and remove the need for a pilot hole in most timbers
• Needle point for immediate start
• Single, wide, deep, lubricated thread for lower driving resistance and fast

The Reisser Trade Pack offers a range of assorted packs of screws ideally suited to projects that require a variety of different length screws. The trade pack offers slightly more variety of sizes of screws than the trial pack, perfect for DIY or the occasional tradesmen.

• 4.0 x 25mm – 200pcs
• 4.0 x 30mm – 200pcs
• 4.0 x 40mm – 200pcs
• 4.0 x 50mm – 200pcs
• 5.0 x 40mm – 200pcs
• 5.0 x 50mm – 200pcs
• 5.0 x 60mm – 200pcs
• 5.0 x 80mm – 200pcs
• PLUS PZ2 x 25mm Reisser Torsion Bits – 20pcs

The Reisser Cutter yellow Screw benefits from having a unique design with 2 slots cut into the thread on 30mm and above screws (1 cut up to 25mm). This allows the screw to work closer to the edge of both timber and board materials without splitting. Includes 1 x Wera Bi-Torsion Pozi Bits

• Single, wide, deep, lubricated thread for lower driving resistance and fast Distinct ribs & tucks: Self countersinking that means there is no need to counterbore.
• Re-inforced Collar: This prevents snapping and gives depth which reduced the risk of ’’cam-out''.
• Lubricated, sharp, wide, deep thread: 40% reduction in driving resistance.
• Yellow tropicalized: A superior rust resistance screw.

The Reisser Cutter yellow Screw benefits from having a unique design with 2 slots cut into the thread on 30mm and above screws (1 cut up to 25mm). This allows the screw to work closer to the edge of both timber and board materials without splitting. Includes 1 x Wera Bi-Torsion Pozi Bits

• Single, wide, deep, lubricated thread for lower driving resistance and fast Distinct ribs & tucks: Self countersinking that means there is no need to counterbore.
• Re-inforced Collar: This prevents snapping and gives depth which reduced the risk of ’’cam-out''.
• Lubricated, sharp, wide, deep thread: 40% reduction in driving resistance.
• Yellow tropicalized: A superior rust resistance screw.

The Reisser Cutter yellow Screw benefits from having a unique design with 2 slots cut into the thread on 30mm and above screws (1 cut up to 25mm). This allows the screw to work closer to the edge of both timber and board materials without splitting. Includes 1 x Wera Bi-Torsion Pozi Bits

• Single, wide, deep, lubricated thread for lower driving resistance and fast Distinct ribs & tucks: Self countersinking that means there is no need to counterbore.
• Re-inforced Collar: This prevents snapping and gives depth which reduced the risk of ’’cam-out''.
• Lubricated, sharp, wide, deep thread: 40% reduction in driving resistance.
• Yellow tropicalized: A superior rust resistance screw.

The Reisser Cutter yellow Screw benefits from having a unique design with 2 slots cut into the thread on 30mm and above screws (1 cut up to 25mm). This allows the screw to work closer to the edge of both timber and board materials without splitting. Includes 1 x Wera Bi-Torsion Pozi Bits

• Single, wide, deep, lubricated thread for lower driving resistance and fast Distinct ribs & tucks: Self countersinking that means there is no need to counterbore.
• Re-inforced Collar: This prevents snapping and gives depth which reduced the risk of ’’cam-out''.
• Lubricated, sharp, wide, deep thread: 40% reduction in driving resistance.
• Yellow tropicalized: A superior rust resistance screw.

The Reisser Cutter yellow Screw benefits from having a unique design with 2 slots cut into the thread on 30mm and above screws (1 cut up to 25mm). This allows the screw to work closer to the edge of both timber and board materials without splitting. Includes 1 x Wera Bi-Torsion Pozi Bits

• Single, wide, deep, lubricated thread for lower driving resistance and fast Distinct ribs & tucks: Self countersinking that means there is no need to counterbore.
• Re-inforced Collar: This prevents snapping and gives depth which reduced the risk of ’’cam-out''.
• Lubricated, sharp, wide, deep thread: 40% reduction in driving resistance.
• Yellow tropicalized: A superior rust resistance screw.

A robust, versatile, professional storage system. Manufactured to the highest quality standards it offers adaptable compartment storage with the additional features of industrial, heavy duty toggle catches plus an integral safety catch which locks on closing the lid to prevent accidental opening and spillage. Cases contain fourteen compartments filled with CUTTER woodscrews.

Attractive, sturdy, plastic Sorta Case offers large volume, deep, removable storage compartments which will accept box quantities of screws (most sizes).
The cases have a clear lid to easily identify the contents, and are designed to interlock on top of each other when stacked to prevent shifting in your van and have an aluminium ‘comfort’ carry handle and quality aluminium toggle catches.
Ideal for storing larger volumes of your favourite screws.
The Chunky offers a great on-site solution to keep your screws organised and in top condition right where you need them!
Includes 2 x 25mm Reisser Torsion Pozi Bits

Spax wirox decking screw ideal for outdoor applications.

Special features;
T-STAR plus: Positive and secure fit of the BIT and better driving, e.g. when working overhead.
Cylindrical head: The small cylinder head can easily be countersunk in the timber with a reduced splitting of the material, providing for an impeccable visual appearance.
SPAX typical ground serrations: Quick and secure fastening.
Fixing thread: Permits a safe and permanent connection of the wood parts.
CUT point: Precision placement allows screwing in without pre-drilling (wood-dependent). Effectively reduces splitting of the wood.
Wirox A9J: Wirox surface has high protection against corrosion and is free from chromium-VI making it more environmentally friendly.

Spax wirox decking screw ideal for outdoor applications.

Special features;
T-STAR plus: Positive and secure fit of the BIT and better driving, e.g. when working overhead.
Cylindrical head: The small cylinder head can easily be countersunk in the timber with a reduced splitting of the material, providing for an impeccable visual appearance.
SPAX typical ground serrations: Quick and secure fastening.
Fixing thread: Permits a safe and permanent connection of the wood parts.
CUT point: Precision placement allows screwing in without pre-drilling (wood-dependent). Effectively reduces splitting of the wood.
Wirox A9J: Wirox surface has high protection against corrosion and is free from chromium-VI making it more environmentally friendly.

SPAX-M is a flat countersunk head, WIROX screw ideal for bolting fibreboards (MDF/HDF).
No pre-drilling (wood-dependent) thanks to special SPAX CUT point.
Effectively reduces splitting and bulging of the material.
Cut point screw in.

Special features;
T-Star plus: Positivie and secure fit of the BIT and better driving, e.g. when working overhead.
Small 75° milling head: Clean, flush sinking of the screw head.
SPAX typical ground serrations: Quick and secure fastening.
Cut point: Precesion placement allows screwing in without pre-drilling (wood-dependent). Effectively reduces splitting of the wood.
WIROX A9J: WIROX surface with high protection against corrosion, it is free from chromium-VI, and is hence considerably more environmentally friendly than conventional surfaces.

Stainless steel screw ideal for outdoor applications, suitable for direct exposure to elemts.
The SPAX rust-free stainless steel offers protection against corrosion.

Special features;
Cross recess Z
Multi Head: Flush countersinking. Mills in wood and stops on metal.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood dependent), its point effectively reduces the splitting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.
Stainless steel A2 1.4567

Stainless steel screw ideal for outdoor applications, suitable for direct exposure to elemts.
The SPAX rust-free stainless steel offers protection against corrosion.

Special features;
Cross recess Z
Multi Head: Flush countersinking. Mills in wood and stops on metal.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood dependent), its point effectively reduces the splitting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.
Stainless steel A2 1.4567

Stainless steel screw ideal for outdoor applications, suitable for direct exposure to elemts.
The SPAX rust-free stainless steel offers protection against corrosion.

Special features;
Cross recess Z
Multi Head: Flush countersinking. Mills in wood and stops on metal.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood dependent), its point effectively reduces the splitting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.
Stainless steel A2 1.4567

Stainless steel screw ideal for outdoor applications, suitable for direct exposure to elemts.
The SPAX rust-free stainless steel offers protection against corrosion.

Special features;
Cross recess Z
Multi Head: Flush countersinking. Mills in wood and stops on metal.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood dependent), its point effectively reduces the splitting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.
Stainless steel A2 1.4567

Stainless steel screw ideal for outdoor applications, suitable for direct exposure to elemts.
The SPAX rust-free stainless steel offers protection against corrosion.

Special features;
Cross recess Z
Multi Head: Flush countersinking. Mills in wood and stops on metal.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood dependent), its point effectively reduces the splitting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.
Stainless steel A2 1.4567

Spax wirox washer head screw ideal for timber constructions and constructing stairways.

Special features
Washer Head: Ensures higher pull through forces, allowing for larger screw distances.
Wirox A9J: Wirox surface has high protection against corrosion and is free from chromium-VI making it more environmentally friendly.
T-Star plus: Positive and secure fit of the BIT and better driving, e.g when working overhead.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood-dependent), its point effectively reduces the spliting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.

Spax wirox washer head screw ideal for timber constructions and constructing stairways.

Special features
Washer Head: Ensures higher pull through forces, allowing for larger screw distances.
Wirox A9J: Wirox surface has high protection against corrosion and is free from chromium-VI making it more environmentally friendly.
T-Star plus: Positive and secure fit of the BIT and better driving, e.g when working overhead.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood-dependent), its point effectively reduces the spliting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.

Spax wirox washer head screw ideal for timber constructions and constructing stairways.

Special features
Washer Head: Ensures higher pull through forces, allowing for larger screw distances.
Wirox A9J: Wirox surface has high protection against corrosion and is free from chromium-VI making it more environmentally friendly.
T-Star plus: Positive and secure fit of the BIT and better driving, e.g when working overhead.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood-dependent), its point effectively reduces the spliting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.

Spax wirox washer head screw ideal for timber constructions and constructing stairways.

Special features
Washer Head: Ensures higher pull through forces, allowing for larger screw distances.
Wirox A9J: Wirox surface has high protection against corrosion and is free from chromium-VI making it more environmentally friendly.
T-Star plus: Positive and secure fit of the BIT and better driving, e.g when working overhead.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood-dependent), its point effectively reduces the spliting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.
4CUT cutter: Starting at screw lengths of 160mm, the special moulding at the thread run out of partial thread screws significantly reduces the screwing-in torque.

Spax wirox washer head screw ideal for timber constructions and constructing stairways.

Special features
Washer Head: Ensures higher pull through forces, allowing for larger screw distances.
Wirox A9J: Wirox surface has high protection against corrosion and is free from chromium-VI making it more environmentally friendly.
T-Star plus: Positive and secure fit of the BIT and better driving, e.g when working overhead.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood-dependent), its point effectively reduces the spliting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.
4CUT cutter: Starting at screw lengths of 160mm, the special moulding at the thread run out of partial thread screws significantly reduces the screwing-in torque.

Spax wirox washer head screw ideal for timber constructions and constructing stairways.

Special features
Washer Head: Ensures higher pull through forces, allowing for larger screw distances.
Wirox A9J: Wirox surface has high protection against corrosion and is free from chromium-VI making it more environmentally friendly.
T-Star plus: Positive and secure fit of the BIT and better driving, e.g when working overhead.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood-dependent), its point effectively reduces the spliting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.

Spax wirox washer head screw ideal for timber constructions and constructing stairways.

Special features
Washer Head: Ensures higher pull through forces, allowing for larger screw distances.
Wirox A9J: Wirox surface has high protection against corrosion and is free from chromium-VI making it more environmentally friendly.
T-Star plus: Positive and secure fit of the BIT and better driving, e.g when working overhead.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood-dependent), its point effectively reduces the spliting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.

Spax wirox washer head screw ideal for timber constructions and constructing stairways.

Special features
Washer Head: Ensures higher pull through forces, allowing for larger screw distances.
Wirox A9J: Wirox surface has high protection against corrosion and is free from chromium-VI making it more environmentally friendly.
T-Star plus: Positive and secure fit of the BIT and better driving, e.g when working overhead.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood-dependent), its point effectively reduces the spliting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.

Spax wirox washer head screw ideal for timber constructions and constructing stairways.

Special features
Washer Head: Ensures higher pull through forces, allowing for larger screw distances.
Wirox A9J: Wirox surface has high protection against corrosion and is free from chromium-VI making it more environmentally friendly.
T-Star plus: Positive and secure fit of the BIT and better driving, e.g when working overhead.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood-dependent), its point effectively reduces the spliting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.

Spax wirox washer head screw ideal for timber constructions and constructing stairways.

Special features
Washer Head: Ensures higher pull through forces, allowing for larger screw distances.
Wirox A9J: Wirox surface has high protection against corrosion and is free from chromium-VI making it more environmentally friendly.
T-Star plus: Positive and secure fit of the BIT and better driving, e.g when working overhead.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood-dependent), its point effectively reduces the spliting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.

Spax wirox washer head screw ideal for timber constructions and constructing stairways.

Special features
Washer Head: Ensures higher pull through forces, allowing for larger screw distances.
Wirox A9J: Wirox surface has high protection against corrosion and is free from chromium-VI making it more environmentally friendly.
T-Star plus: Positive and secure fit of the BIT and better driving, e.g when working overhead.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood-dependent), its point effectively reduces the spliting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.

Spax wirox washer head screw ideal for timber constructions and constructing stairways.

Special features
Washer Head: Ensures higher pull through forces, allowing for larger screw distances.
Wirox A9J: Wirox surface has high protection against corrosion and is free from chromium-VI making it more environmentally friendly.
T-Star plus: Positive and secure fit of the BIT and better driving, e.g when working overhead.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood-dependent), its point effectively reduces the spliting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.
4CUT cutter: Starting at screw lengths of 160mm, the special moulding at the thread run out of partial thread screws significantly reduces the screwing-in torque.

Spax wirox washer head screw ideal for timber constructions and constructing stairways.

Special features
Washer Head: Ensures higher pull through forces, allowing for larger screw distances.
Wirox A9J: Wirox surface has high protection against corrosion and is free from chromium-VI making it more environmentally friendly.
T-Star plus: Positive and secure fit of the BIT and better driving, e.g when working overhead.
Ground serrations: For quick and secure fastening.
4CUT point: No pre-drilling (wood-dependent), its point effectively reduces the spliting effect. The square end pushes aside the fibre of the wood and reduces the screwing-in torque.
4CUT cutter: Starting at screw lengths of 160mm, the special moulding at the thread run out of partial thread screws significantly reduces the screwing-in torque.

The Spectre Site Organiser 900 is a tough compartment case with a metal handle and metal catches with a full box of each of Forgefix’s most popular screw sizes.

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments. Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw and ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments. Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw and ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments. Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw and ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments. Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw and ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments. Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw and ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments. Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw and ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments. Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw and ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments. Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw and ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments. Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw and ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments. Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw and ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments. Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw and ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.

A premium multi-material screw featuring the award winning C2 twin-cut technology. The dual angle full thread design ensures maximum pull-out strength on every fixing. Ideal for applications when optimum holding force is required such as hinges, brackets and high load environments. Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw and ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage. Coated with a high-molecular polymer lubricant that reduces the insertion torque by up to 52% and increases rust protection up to 20 times longer than a standard zinc plating.

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power. NOTE: Sharp point only.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power. NOTE: Sharp point only.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power. NOTE: Sharp point only.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power. NOTE: Sharp point only.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power. NOTE: Sharp point only.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power. NOTE: Sharp point only.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power. NOTE: Sharp point only.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power. NOTE: Sharp point only.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power. NOTE: Partially threaded.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power. NOTE: Partially threaded.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power. NOTE: Partially threaded.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

Specifically designed as a multi-purpose product, the 25° sharp point, special thread design, lubrication and corrosion resistant plating ensures the screw will consistently perform efficiently in hardwood, chipboard, MDF, plastic and thin sheet metal, whilst offering exceptional holding power.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

A traditional heavy duty woodscrew mainly used for timber to timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. NOTE: Thread length is 2/3 of the overall length screw. E.G. 100mm = 60mm thread length (approx.).

Used to secure plasterboard to timber stud work. The collated strips are specifically designed to be compatible with all leading power tool brands.

• The collated strips are specifically designed to be compatible with all leading power tool brands

Used to secure plasterboard to timber stud work. The collated strips are specifically designed to be compatible with all leading power tool brands.

• The collated strips are specifically designed to be compatible with all leading power tool brands

Used to secure plasterboard to timber stud work. The collated strips are specifically designed to be compatible with all leading power tool brands.

• The collated strips are specifically designed to be compatible with all leading power tool brands

Used to secure plasterboard to timber stud work. The collated strips are specifically designed to be compatible with all leading power tool brands.

• The collated strips are specifically designed to be compatible with all leading power tool brands

Used to secure plasterboard to timber stud work. The collated strips are specifically designed to be compatible with all leading power tool brands.

• The collated strips are specifically designed to be compatible with all leading power tool brands

Used to secure plasterboard to timber stud work. The collated strips are specifically designed to be compatible with all leading power tool brands.

• The collated strips are specifically designed to be compatible with all leading power tool brands

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. The collated strips are specifically designed to be compatible with all leading power tool brands.

• The collated strips are specifically designed to be compatible with all leading power tool brands

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. The collated strips are specifically designed to be compatible with all leading power tool brands.

• The collated strips are specifically designed to be compatible with all leading power tool brands

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. The collated strips are specifically designed to be compatible with all leading power tool brands.

• The collated strips are specifically designed to be compatible with all leading power tool brands

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. The collated strips are specifically designed to be compatible with all leading power tool brands.

• The collated strips are specifically designed to be compatible with all leading power tool brands

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. The collated strips are specifically designed to be compatible with all leading power tool brands.

• The collated strips are specifically designed to be compatible with all leading power tool brands

Used to secure plasterboard to drywall and ceiling track systems with a max. of 0.6mm thickness. The collated strips are specifically designed to be compatible with all leading power tool brands.

• The collated strips are specifically designed to be compatible with all leading power tool brands

Used when fixing roofing and cladding sheets to timber purlins.

• For medium duty rust protection
• Conforms to Eurocode 5 and service class 2

Used when fixing roofing and cladding sheets to timber purlins.

• For medium duty rust protection
• Conforms to Eurocode 5 and service class 2

Used when fixing roofing and cladding sheets to timber purlins.

• For medium duty rust protection
• Conforms to Eurocode 5 and service class 2

Used when fixing roofing and cladding sheets to timber purlins.

• For medium duty rust protection
• Conforms to Eurocode 5 and service class 2

Used when fixing roofing and cladding sheets to timber purlins.

• For medium duty rust protection
• Conforms to Eurocode 5 and service class 2

Used when fixing roofing and cladding sheets to timber purlins.

• For medium duty rust protection
• Conforms to Eurocode 5 and service class 2

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and HAMMER fixings.

• Designed to replace traditional masonry fixings
• TX30 TX Drive recess to reduce driver wear & prevent camming-out
• Serrated V-threads to achieve optimum insertion into all masonry types
• Zinc plated and yellow passivated for increased corrosion resistance
• High-Low thread on first 30mm to aid insertion and reduce torque
• Ideal for fitting windows and door frames
• Flat countersunk head with five locking ribs

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and HAMMER fixings.

• Designed to replace traditional masonry fixings
• TX30 TX Drive recess to reduce driver wear & prevent camming-out
• Serrated V-threads to achieve optimum insertion into all masonry types
• Zinc plated and yellow passivated for increased corrosion resistance
• High-Low thread on first 30mm to aid insertion and reduce torque
• Ideal for fitting windows and door frames
• Flat countersunk head with five locking ribs

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and HAMMER fixings.

• Designed to replace traditional masonry fixings
• TX30 TX Drive recess to reduce driver wear & prevent camming-out
• Serrated V-threads to achieve optimum insertion into all masonry types
• Zinc plated and yellow passivated for increased corrosion resistance
• High-Low thread on first 30mm to aid insertion and reduce torque
• Ideal for fitting windows and door frames
• Flat countersunk head with five locking ribs

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and HAMMER fixings.

• Designed to replace traditional masonry fixings
• TX30 TX Drive recess to reduce driver wear & prevent camming-out
• Serrated V-threads to achieve optimum insertion into all masonry types
• Zinc plated and yellow passivated for increased corrosion resistance
• High-Low thread on first 30mm to aid insertion and reduce torque
• Ideal for fitting windows and door frames
• Flat countersunk head with five locking ribs

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and HAMMER fixings.

• Designed to replace traditional masonry fixings
• TX30 TX Drive recess to reduce driver wear & prevent camming-out
• Serrated V-threads to achieve optimum insertion into all masonry types
• Zinc plated and yellow passivated for increased corrosion resistance
• High-Low thread on first 30mm to aid insertion and reduce torque
• Ideal for fitting windows and door frames
• Flat countersunk head with five locking ribs

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and HAMMER fixings.

• Designed to replace traditional masonry fixings
• TX30 TX Drive recess to reduce driver wear & prevent camming-out
• Serrated V-threads to achieve optimum insertion into all masonry types
• Zinc plated and yellow passivated for increased corrosion resistance
• High-Low thread on first 30mm to aid insertion and reduce torque
• Ideal for fitting windows and door frames
• Flat countersunk head with five locking ribs

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and HAMMER fixings.

• Designed to replace traditional masonry fixings
• TX30 TX Drive recess to reduce driver wear & prevent camming-out
• Serrated V-threads to achieve optimum insertion into all masonry types
• Zinc plated and yellow passivated for increased corrosion resistance
• High-Low thread on first 30mm to aid insertion and reduce torque
• Ideal for fitting windows and door frames
• Flat countersunk head with five locking ribs

Used to secure plasterboard to timber stud work.

• Phillips No.2 recess for a positive drive
• Bugle head to reduce likelihood of damaging the board surface
• 25° super sharp point for ease of penetration
• Coarse thread for extreme hold

Used to secure plasterboard to timber stud work.

• Phillips No.2 recess for a positive drive
• Bugle head to reduce likelihood of damaging the board surface
• 25° super sharp point for ease of penetration
• Coarse thread for extreme hold

Used to secure plasterboard to timber stud work.

• Phillips No.2 recess for a positive drive
• Bugle head to reduce likelihood of damaging the board surface
• 25° super sharp point for ease of penetration
• Coarse thread for extreme hold

Used to secure plasterboard to timber stud work.

• Phillips No.2 recess for a positive drive
• Bugle head to reduce likelihood of damaging the board surface
• 25° super sharp point for ease of penetration
• Coarse thread for extreme hold

Used to secure plasterboard to timber stud work.

• Phillips No.2 recess for a positive drive
• Bugle head to reduce likelihood of damaging the board surface
• 25° super sharp point for ease of penetration
• Coarse thread for extreme hold

Used to secure plasterboard to timber stud work.

• Phillips No.2 recess for a positive drive
• Bugle head to reduce likelihood of damaging the board surface
• 25° super sharp point for ease of penetration
• Coarse thread for extreme hold

Used to secure plasterboard to timber stud work.

• Phillips No.2 recess for a positive drive
• Bugle head to reduce likelihood of damaging the board surface
• 25° super sharp point for ease of penetration
• Coarse thread for extreme hold

Used to secure plasterboard to timber stud work.

• Phillips No.2 recess for a positive drive
• Bugle head to reduce likelihood of damaging the board surface
• 25° super sharp point for ease of penetration
• Coarse thread for extreme hold

Used to secure plasterboard to timber stud work.

• Phillips No.2 recess for a positive drive
• Bugle head to reduce likelihood of damaging the board surface
• 25° super sharp point for ease of penetration
• Coarse thread for extreme hold

Used to secure plasterboard to timber stud work.

• Phillips No.2 recess for a positive drive
• Bugle head to reduce likelihood of damaging the board surface
• 25° super sharp point for ease of penetration
• Coarse thread for extreme hold

Used to secure plasterboard to timber stud work.

• Phillips No.2 recess for a positive drive
• Bugle head to reduce likelihood of damaging the board surface
• 25° super sharp point for ease of penetration
• Coarse thread for extreme hold

Used to secure plasterboard to timber stud work. NOTE: Partially threaded.

• Phillips No.2 recess for a positive drive
• Bugle head to reduce likelihood of damaging the board surface
• 25° super sharp point for ease of penetration
• Coarse thread for extreme hold

Used to secure plasterboard to timber stud work. NOTE: Partially threaded.

• Phillips No.2 recess for a positive drive
• Bugle head to reduce likelihood of damaging the board surface
• 25° super sharp point for ease of penetration
• Coarse thread for extreme hold

Used to secure plasterboard to timber stud work. NOTE: Partially threaded.

• Phillips No.2 recess for a positive drive
• Bugle head to reduce likelihood of damaging the board surface
• 25° super sharp point for ease of penetration
• Coarse thread for extreme hold

Used to secure plasterboard to timber stud work. NOTE: Partially threaded.

• Phillips No.2 recess for a positive drive
• Bugle head to reduce likelihood of damaging the board surface
• 25° super sharp point for ease of penetration
• Coarse thread for extreme hold

Suitable for all kinds of concrete and masonry substrate materials. Ideal for medium and lightweight applications.

Suitable for all kinds of concrete and masonry substrate materials. Ideal for medium and lightweight applications.

A fully threaded, grade 8.8 high tensile set screw used in a wide variety of applications. NOTE: Nuts not included.

• Plated in Trivalent Chromium (Cr3) Zinc
• Manufactured from grade 8.8 carbon steel

A fully threaded, grade 8.8 high tensile set screw used in a wide variety of applications. NOTE: Nuts not included.

• Plated in Trivalent Chromium (Cr3) Zinc
• Manufactured from grade 8.8 carbon steel

A fully threaded, grade 8.8 high tensile set screw used in a wide variety of applications. NOTE: Nuts not included.

• Plated in Trivalent Chromium (Cr3) Zinc
• Manufactured from grade 8.8 carbon steel

A fully threaded, grade 8.8 high tensile set screw used in a wide variety of applications. NOTE: Nuts not included.

• Plated in Trivalent Chromium (Cr3) Zinc
• Manufactured from grade 8.8 carbon steel

A fully threaded, grade 8.8 high tensile set screw used in a wide variety of applications. NOTE: Nuts not included.

• Plated in Trivalent Chromium (Cr3) Zinc
• Manufactured from grade 8.8 carbon steel

A fully threaded, grade 8.8 high tensile set screw used in a wide variety of applications. NOTE: Nuts not included.

• Plated in Trivalent Chromium (Cr3) Zinc
• Manufactured from grade 8.8 carbon steel